Exergetic, Energetic, and entropy production evaluations of parabolic trough collector retrofitted with elliptical dimpled receiver tube filled with hybrid nanofluid
Küçük Resim Yok
Tarih
2023
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Pergamon-Elsevier Science Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this paper, a numerical study was performed on a parabolic trough collector receiver tube containing elliptical dimpled fins with different elliptical ratios (ER = 0.66-1.66) under turbulent flow regime. The C++ code was developed to perform a non-uniform heat flux on outside of the receiver tube to get approximation real working conditions. Different mono and hybrid nanofluids and their combinations with different nanoparticle volume fractions (2.0 %TiO2/Syltherm800, 2.0 %Al2O3/Syltherm800, 0.5 %TiO2-1.5 %Al2O3/Syltherm800, 1.0 %TiO2-1.0 %Al2O3/Syltherm800, and 1.5 %TiO2-0.5 %Al2O3/Syltherm800) were used as a working fluid. The study provides a detailed analysis of the hydro-thermal characteristics, exergetic, and entropy production of the parabolic trough collector. 1.5 %Al2O3-0.5 %TiO2/Syltherm800 hybrid nanofluid shows the best increase in results obtained in this study using elliptical ratio of a/b = 5/3. The use of the elliptical ratio of a/b = 5/3, the average Nusselt number increases with 38 % compared to the receiver tube without elliptical dimpled fin. Total entropy generation was reduced up to 16.82 % for the elliptical ratio of a/b = 5/3. With the inserting elliptical dimpled fins of a/b = 5/3, the Performance Evaluation Criterion was detected as 1.81 compared to while the thermal efficiency increases from 74 % to 80 % at the lowest Reynolds numbers.
Açıklama
Anahtar Kelimeler
Parabolic trough collector, Elliptical Dimpled fin, Hybrid nanofluid, Entropy production, Exergy efficiency, Non -uniform heat flux
Kaynak
Applied Thermal Engineering
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
223
