The Effect of Milling Time on Microstructure and Wear Behaviours of AISI 304 Stainless Steel Produced by Powder Metallurgy

Basit Öğe Kaydı
dc.authoridYAVUZER, Bekir/0000-0001-8984-774X
dc.contributor.authorYavuzer, B.
dc.contributor.authorOzyurek, D.
dc.contributor.authorGuru, M.
dc.date.accessioned2024-09-29T16:05:14Z
dc.date.available2024-09-29T16:05:14Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description8th International Advances in Applied Physics and Materials Science Congress and Exhibition (APMAS) -- APR 24-30, 2018 -- Fethiye, TURKEYen_US
dc.description.abstractIn this study, the effect of milling time on wear behavior of the AISI 304 stainless steel produced by the mechanical alloying method was investigated. In the study element powders were prepared and mechanically milled at five different milling times (30, 60, 90, 120, and 150 min) in a mechanical alloying device. The milled powders were pre-shaped and sintered at 1300 degrees C for 1 h and cooled to room temperature in the furnace. Produced samples microstructure and XRD examination were carried out. Wear tests were performed using a pin-on-disc type wear testing device. In this study, the hardness values were found to have increased by increasing milling time. The maximum hardness values were measured for the 150 min milled samples. The lowest weight losses were measured with 150 min milled samples. The wear test results were compatible with hardness results.en_US
dc.description.sponsorshipKarabuk University Scientific Research Projects Department [KBU-BAP-17-DR-424]en_US
dc.description.sponsorshipThe authors are pleased to acknowledge the financial support for this study from Karabuk University Scientific Research Projects Department. Project Number: KBU-BAP-17-DR-424.en_US
dc.identifier.doi10.12693/APhysPolA.135.735
dc.identifier.endpage738en_US
dc.identifier.issn0587-4246
dc.identifier.issn1898-794X
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85071150314en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage735en_US
dc.identifier.urihttps://doi.org/10.12693/APhysPolA.135.735
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6592
dc.identifier.volume135en_US
dc.identifier.wosWOS:000481717100048en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolish Acad Sciences Inst Physicsen_US
dc.relation.ispartofActa Physica Polonica Aen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectDuplexen_US
dc.titleThe Effect of Milling Time on Microstructure and Wear Behaviours of AISI 304 Stainless Steel Produced by Powder Metallurgyen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu