Mechanical Properties and Corrosion Behaviour of Copper/Titanium Composite Plates made by Explosive Welding after Heat Treatment

Basit Öğe Kaydı
dc.contributor.authorYildirim, Mehmet Serkan
dc.contributor.authorKaya, Yakup
dc.date.accessioned2024-09-29T15:54:43Z
dc.date.available2024-09-29T15:54:43Z
dc.date.issued2024
dc.departmentKarabük Üniversitesien_US
dc.description.abstractCopper and titanium plates were used in the studies. These plates were joined together by explosive welding using different amounts of explosives. The resulting composite plates were heat-treated at different temperatures. In microstructural studies, it was observed that the joints with the least rate of explosive used had an almost flat joint interface and as the explosive rate increased, a wavy structure was formed. Hardness values were found to increase as the rate of explosives increased, but hardness values decreased after heat treatment. It was observed that notch impact strength decreased with increasing explosive rate, but there was an increase in impact toughness values after heat treatment. Torsional testing of all specimens revealed no visible defects. Neutral salt spray tests showed that the copper surfaces of the composite plates corroded, but there was no corrosion on the titanium side.en_US
dc.identifier.doi10.1007/s12666-024-03431-8
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.scopus2-s2.0-85201426667en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-024-03431-8
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4225
dc.identifier.wosWOS:001291944500003en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofTransactions of the Indian Institute of Metalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBimetallic compositeen_US
dc.subjectCorrosionen_US
dc.subjectExplosive weldingen_US
dc.subjectCopperen_US
dc.subjectTitaniumen_US
dc.subjectHeat treatmenten_US
dc.titleMechanical Properties and Corrosion Behaviour of Copper/Titanium Composite Plates made by Explosive Welding after Heat Treatmenten_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu