ESTIMATION of SURFACE ROUGHNESS and FLANK WEAR in MILLING of INCONEL 625 SUPERALLOY

Basit Öğe Kaydı
dc.contributor.authorAkgün, M.
dc.contributor.authorDemir, H.
dc.date.accessioned2024-09-29T16:16:38Z
dc.date.available2024-09-29T16:16:38Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe main objective of this work is to experimentally investigate and statistically evaluate the effects of the milling parameters on surface roughness (Ra) and flank wear (Vb) in the milling of Inconel 625. Thus, milling experiments on different cutting conditions with Physical vapor deposition (PVD) and Chemical vapor deposition (CVD) coated inserts have been conducted on CNC milling machine according to Taguchi L18 orthogonal array. The effect levels of the milling conditions on Ra and Vb have been determined with analysis of variance (anova) at 95% confidence level. The analysis results indicate that the cutting tool is the most significant parameter affecting Ra while the feed rate is the most significant parameter affecting Vb. Then the linear and quadratic regression models have been applied in order to estimate Ra and Vb. The results show that a higher correlation coefficient (R2) is obtained via the quadratic regression model with a value of 0.97 for both Ra and Vb. Finally, the verification results are in excellent agreement with experimental findings, regarding the surface roughness (Ra), and tool wear (Vb). © 2021 World Scientific Publishing Company.en_US
dc.description.sponsorshipScienti¯c and Technological Research Council of Turkey; TÜBİTAK, (119M785)en_US
dc.identifier.doi10.1142/S0218625X21500116
dc.identifier.issn0218-625X
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85099753247en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X21500116
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9230
dc.identifier.volume28en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWorld Scientificen_US
dc.relation.ispartofSurface Review and Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectInconel 625 superalloyen_US
dc.subjectmillingen_US
dc.subjectoptimizationen_US
dc.subjectsurface roughnessen_US
dc.titleESTIMATION of SURFACE ROUGHNESS and FLANK WEAR in MILLING of INCONEL 625 SUPERALLOYen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu