Effects of Re-Aging on the Fatigue Properties of Aluminum Alloy AA7075
dc.contributor.author | Fakioglu, Avni | |
dc.contributor.author | Oezyuerek, Dursun | |
dc.date.accessioned | 2024-09-29T16:07:55Z | |
dc.date.available | 2024-09-29T16:07:55Z | |
dc.date.issued | 2014 | |
dc.department | Karabük Üniversitesi | en_US |
dc.description.abstract | In this study, 7075 aluminum alloy was subjected to triple-aging of retrogression and re-aging (RRA) treatments. The alloy was retrogressed at 220 degrees C for 60 minutes following the T6 heat treatment and later re-aged at temperatures between 100 degrees C and 140 degrees C for 24 hours and at 120 degrees C for various durations in the range of 15-35 hours. The effects of temperature and duration of re-aging on hardness and the fatigue behaviors of RRA tempered 7075 aluminum alloys were investigated. The results show that temperature and duration of re-aging have an influence on both hardness and fatigue resistances. An increment of the hardness values depends on increasing of re-aging temperature and times until 120 degrees C and 24 hours and reaches to the maximum value. However, those values decrease with higher re-aging temperatures and longer duration than 120 degrees C and 24 hours, respectively. On the other hand, in the fatigue tests, the highest fatigue resistance was observed for the sample re-aged at 120 degrees C for 24 hours, while the sample re-aged at 140 degrees C for 24 hours showed the longest fatigue life under lower fatigue stress. | en_US |
dc.identifier.doi | 10.3139/120.110598 | |
dc.identifier.endpage | 582 | en_US |
dc.identifier.issn | 0025-5300 | |
dc.identifier.issue | 7-8 | en_US |
dc.identifier.scopus | 2-s2.0-84905008576 | en_US |
dc.identifier.scopusquality | Q2 | en_US |
dc.identifier.startpage | 575 | en_US |
dc.identifier.uri | https://doi.org/10.3139/120.110598 | |
dc.identifier.uri | https://hdl.handle.net/20.500.14619/7246 | |
dc.identifier.volume | 56 | en_US |
dc.identifier.wos | WOS:000339721000008 | en_US |
dc.identifier.wosquality | Q4 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | Carl Hanser Verlag | en_US |
dc.relation.ispartof | Materials Testing | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Materials testing | en_US |
dc.subject | fatigue | en_US |
dc.subject | aluminium alloy | en_US |
dc.subject | re-aging | en_US |
dc.subject | hardness | en_US |
dc.title | Effects of Re-Aging on the Fatigue Properties of Aluminum Alloy AA7075 | en_US |
dc.type | Article | en_US |