Resistance spot weldability of dissimilar materials (AISI 316L-DIN EN 10130-99 steels)

Basit Öğe Kaydı
dc.authoridKACAR, Ramazan/0000-0002-3903-1838
dc.contributor.authorHasanbaoglu, Ahmet
dc.contributor.authorKacar, Ramazan
dc.date.accessioned2024-09-29T15:57:52Z
dc.date.available2024-09-29T15:57:52Z
dc.date.issued2007
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe resistance spot weld of dissimilar materials is generally more challenging than that of similar materials due to differences in the physical, chemical and mechanical properties of the base metals. The influence of the primary welding parameters affecting the heat input such as; peak current on the morphology, microhardness, and tensile shear load bearing capacity of dissimilar welds between AISI 316L austenitic stainless steel and DIN EN 10130-99 (7114 grade) interstitial free steel has been investigated in this study. Although, an acceptable joint strength was obtained at 7 kA peak weld current, the optimum welding parameters producing maximum joint strength were established at a peak weld current of 9 kA, where the electrode force and weld time are kept constant at 6 bars and 17 cycles, respectively. The primary cause of weakening of the weldment is identified as the excessive grain growing region of heat affected zone in case of 7114 grade interstitial free steel. (C) 2006 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2006.05.013
dc.identifier.endpage1800en_US
dc.identifier.issn0261-3069
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-34249720584en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage1794en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2006.05.013
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5054
dc.identifier.volume28en_US
dc.identifier.wosWOS:000247786100007en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectresistance spot welden_US
dc.subjectdissimilar materialsen_US
dc.titleResistance spot weldability of dissimilar materials (AISI 316L-DIN EN 10130-99 steels)en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu