Microstructural investigation and strength properties of structural lightweight concrete produced with Zeolitic tuff aggregate

Küçük Resim Yok

Tarih

2021

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Elsevier

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

In this study, physical, mechanical, and microscopic investigations were carried out on structural lightweight concretes (LWC) produced with zeolitic aggregate. Zeolitic tuff aggregate, 300 kg/m(3), and 400 kg/m(3) dosages OPC and 0.70 and 0.45 water/cement ratios were used in LWC productions. An optical microscope method was used to determine the aggregate-cement interface zone (ITZ) on the hardened LWC. SEM analyses were performed on the specimens to determine microstructural properties as well. Moreover, water absorption, capillary suction, and compressive strength tests were carried out. The experimental results showed that ITZ thickness and compressive strength are significantly depend on the cement dosage and w/c ratio in structural LWC. ITZ thicknesses were measured 20-33% less in LWC produced with a 0.45 w/c ratio and the 400 kg/m(3) cement dosage. On the SEM analyses, dense CH and ettringite formations were observed at the early age of all LWC in high w/c ratios. However, on the 28th day, well-formed CSH structures were observed in large areas with lower w/c ratios.

Açıklama

Anahtar Kelimeler

Lightweight concrete, Zeolitic tuff, ITZ, SEM, Optical microscope

Kaynak

Journal of Building Engineering

WoS Q Değeri

Q1

Scopus Q Değeri

Q1

Cilt

43

Sayı

Künye