Determination of cutter path strategies and cutting parameters effects on surface roughness in pocket milling by TAGUCHI method

Basit Öğe Kaydı
dc.contributor.authorSakarya, N.
dc.contributor.authorGöloglu, C.
dc.date.accessioned2024-09-29T16:22:23Z
dc.date.available2024-09-29T16:22:23Z
dc.date.issued2006
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn pocket milling operations, which they are often encountered in plastic mould manufacture, narrowing the gap as far as possible between the surface roughness values obtained at finish milling and the surface roughness values met by further finishing operations is in demand. Selection of cutting speed, feed rate, depth of cut and step over values with appropriate cutter path strategies are all important variables which define cutting time and surface texture. The effects of every single variable on surface roughness are known, but results revealed in their combinations cannot be clearly estimated. In the experimental study conducted, surface roughness variations under different cutter path strategies and cutting parameters in pocket milling have been investigated. In finish milling one direction, back and forth and spiral cutter path strategies have been employed. Four different levels for cutting speed, feed rate, depth of cut and step over values have been determined and design of experiment has been conducted by Taguchi orthogonal array. The experiments are done on commonly used IMPAX EN/DIN 1.2738 mould material with four flutes HSSE end mills. ANOVA tables have been compiled with average surface roughness values obtained from the experiments. The effects of related parameters on surface roughness have been determined for each cutter paths. The ideal cutter path strategy under the conditions considered in pocket milling has been found out as spiral.en_US
dc.identifier.endpage611en_US
dc.identifier.issn1300-1884
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-33845437146en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage603en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/10031
dc.identifier.volume21en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCutter path strategyen_US
dc.subjectPocket millingen_US
dc.subjectSurface roughnessen_US
dc.subjectTaguchi methoden_US
dc.titleDetermination of cutter path strategies and cutting parameters effects on surface roughness in pocket milling by TAGUCHI methoden_US
dc.title.alternativeTaguchi? yöntemi? i?le cep i?çlemede kullanilan takim yolu hareketleri?ni?n ve kesme parametreleri?ni?n yüzey pürüzlülü?üne etki?leri? ni?n beli?rlenmesi?en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu