Investigation of Wear and Corrosion Behaviors of Ti15Mo Alloy Produced by Mechanical Alloying Method in SBF Environment

dc.authoridSimsek, Ijlal/0000-0001-6542-8567
dc.contributor.authorSimsek, Ijlal
dc.contributor.authorOzyurek, Dursun
dc.date.accessioned2024-09-29T15:51:25Z
dc.date.available2024-09-29T15:51:25Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study aims to examine the wear performance and electrochemical corrosion properties of Ti15Mo alloy produced by mechanical alloying (MA) in simulated body fluid (SBF) environment. Ti15Mo alloy was produced by milling in a mechanical alloying device for 120 min. The alloys produced are examined using SEM, X-ray diffraction, hardness and density measurements. Three different loads, four different sliding distances and 1 m center dot sec(-1) sliding speed were used in the tests performed in SBF environment. Corrosion tests were carried out using potentiodynamic polarization technique, cyclic polarization measurement at 37 degrees C body temperature, in SBF, with a scan interval of +/- 750 mV and scan rate of 1 mV/sec. Density and hardness measurement results of MA'ed Ti15Mo alloy are 4.93 g/cm(3) and 299.5 HV, respectively. As a result of increasing the load applied during the wear tests, the resistance of the samples against wear has decreased and the amount of wear has increased. Corrosion tests showed that the potentiodynamic polarization parameters were 36.969 mA/cm(2) for I-corr value and 0.54448 mmpy for corrosion rate. Corrosion tests made in the environment of SBF and at body temperature revealed that there was very little pitting corrosion observed in MA'ed Ti15Mo alloy.en_US
dc.identifier.doi10.1007/s11106-019-00094-9
dc.identifier.endpage454en_US
dc.identifier.issn1068-1302
dc.identifier.issn1573-9066
dc.identifier.issue7-8en_US
dc.identifier.scopus2-s2.0-85076139897en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage446en_US
dc.identifier.urihttps://doi.org/10.1007/s11106-019-00094-9
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4055
dc.identifier.volume58en_US
dc.identifier.wosWOS:000500627000002en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofPowder Metallurgy and Metal Ceramicsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectbiomaterialen_US
dc.subjectcorrosionen_US
dc.subjectmechanical alloyingen_US
dc.subjectTi alloyen_US
dc.subjectwearen_US
dc.titleInvestigation of Wear and Corrosion Behaviors of Ti15Mo Alloy Produced by Mechanical Alloying Method in SBF Environmenten_US
dc.typeArticleen_US

Dosyalar