Three-Dimensional Elastic Behavior of Oriental Plane (Platanus orientalis L.) Wood and Investigation Via Finite Element Analysis
Küçük Resim Yok
Tarih
2024
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Lukasiewicz Research Network - Poznan Institute of Technology
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Wood is an anisotropic material with a complex structure. It is very difficult to examine the properties of complex structured materials. Finite element analysis is a technique that can be used to analyze the mechanical behavior of wood and wood-based materials. The objective of this study is to determine the mechanical properties of Oriental plane (Platanus orientalis L.) wood both experimentally and using finite element analysis. For tensile strength and compressive strength, with the aim of determining the wood’s behavior depending on its anisotropic axes, samples were prepared in three axial directions: radial, tangential and longitudinal. Under the same conditions and with the same dimensions, longitudinal samples were modeled in a com-puter environment using finite element analysis. ANSYS Multiphysics/LS-DYNA was used for simulation. It was determined that the laboratory results and the simulation results were in good agreement, with a similarity ratio of over 90%. © 2024, Lukasiewicz Research Network - Poznan Institute of Technology. All rights reserved.
Açıklama
Anahtar Kelimeler
experimental analysis, finite element analysis, mechanical properties, Oriental plane (Platanus orientalis L.)
Kaynak
Drewno
WoS Q Değeri
Scopus Q Değeri
Q3
Cilt
67
Sayı
213
