Effect of Continuous and Pulsed Currents on Microstructural Evolution of Stainless Steel Joined by TIG Welding

Basit Öğe Kaydı
dc.authoridKAHRAMAN, NIZAMETTIN/0000-0002-7152-3795
dc.authoriddurgutlu, ahmet/0000-0003-3839-2903
dc.authoridkaya, yakup/0000-0002-9951-2844
dc.authoridFINDIK, TAYFUN/0000-0003-2057-4864
dc.contributor.authorDurgutlu, A.
dc.contributor.authorFindik, T.
dc.contributor.authorGulenc, B.
dc.contributor.authorCevik, B.
dc.contributor.authorKaya, Y.
dc.contributor.authorKahraman, N.
dc.date.accessioned2024-09-29T16:07:56Z
dc.date.available2024-09-29T16:07:56Z
dc.date.issued2015
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, AISI 316L series austenitic stainless steel sheets were joined by tungsten inert gas welding method in continuous and pulsed currents. Regarding microstructural investigation and hardness values of weld metal, samples were welded to investigate the effect of current type on grain structures of weld metal. Results showed that samples welded by using pulsed current had considerable different properties compared to the samples welded by using continuous current. While the weld metals of joinings obtained by using continuous current displayed a coarse-grained and columnar structure, weld metals obtained by using pulsed current had a finer-grained structure. It was also found that hardness values of samples, which were welded with continuous and pulsed current, were quite different.en_US
dc.identifier.doi10.3139/147.110352
dc.identifier.endpage637en_US
dc.identifier.issn0032-678X
dc.identifier.issue11en_US
dc.identifier.scopus2-s2.0-84950268532en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage627en_US
dc.identifier.urihttps://doi.org/10.3139/147.110352
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7267
dc.identifier.volume52en_US
dc.identifier.wosWOS:000368292800002en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofPraktische Metallographie-Practical Metallographyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTensile Propertiesen_US
dc.subjectTitanium-Alloyen_US
dc.subjectShielding Gasen_US
dc.subjectParametersen_US
dc.subjectSelectionen_US
dc.subjectHydrogenen_US
dc.subjectArgonen_US
dc.titleEffect of Continuous and Pulsed Currents on Microstructural Evolution of Stainless Steel Joined by TIG Weldingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu