Examination of the strength and ductility of AA-1050 material shaped with the multi-stage deep drawing method

Basit Öğe Kaydı
dc.contributor.authorKarali, M.
dc.date.accessioned2024-09-29T16:16:22Z
dc.date.available2024-09-29T16:16:22Z
dc.date.issued2011
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDeep drawing materials are easily shapeable materials, because of their high ductility. Aluminum alloy materials are classified in the deep drawing materials group because they are easily shapeable. In order to increase the strength, materials are made an alloy by adding some chemical additives. They are also provided strength increasing by tempering. Normally, materials harden when reshaped under plastic deformation. Reshape the shaped materials harden while reducing its ductility. In this study, changes in mechanical properties immediately after the AA-1050 (T0) sheet material is shaped by the multi-stage deep drawing method and after storage were investigated. It was calculated that a 4-stage shaping is needed for a tube production at selected sizes. Deep drawing treatments are made in sizes of these stages. Samples were collected from each cold-shaped intermediary form. Mechanical properties of this materials are determined by applying tensile test. Some basic parameters, like tensile stresses, max. uniform strain rates, strain hardenings and strength coefficients, are investigated and compared. Obtained data were explained using graphs. It was observed that tensile strength increased and strain quantities were reduced at every stage. It is also seen an increase in strain hardening index.en_US
dc.identifier.doi10.2478/v10172-011-0026-8
dc.identifier.endpage230en_US
dc.identifier.issn1733-3490
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-80051984145en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage223en_US
dc.identifier.urihttps://doi.org/10.2478/v10172-011-0026-8
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9051
dc.identifier.volume56en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofArchives of Metallurgy and Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAl-1050en_US
dc.subjectMulti-stage deep drawingen_US
dc.subjectSheet metal formingen_US
dc.titleExamination of the strength and ductility of AA-1050 material shaped with the multi-stage deep drawing methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu