MECHANICAL AND WEAR PROPERTIES OF HIGH RATE NIAL PARTICLE-REINFORCED AL COMPOSITES PRODUCED BY PRESSURE INFILTRATION METHOD

Basit Öğe Kaydı
dc.authoridCEVIK, Engin/0000-0002-4863-8762
dc.authoridDEMIRTAS, Huseyin/0000-0002-2442-2158
dc.contributor.authorDemirtas, Huseyin
dc.contributor.authorYildiz, Ramazan
dc.contributor.authorCevik, Engin
dc.date.accessioned2024-09-29T15:54:49Z
dc.date.available2024-09-29T15:54:49Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, Al matrix composites reinforced by the high amount of NiAl (40%) were produced by the pressure infiltration method. Commercially AA1050 (99.59 %) was used as matrix material and NiAl (at. 1:1) particles were used as reinforcement. Also, a small amount of Mo (wt. 2%) was added into NiAl for a better matrix-particle interface and to increase the mechanical properties. The proportion of particles was kept constant, and their sizes were changed from 45 to 125 mu m. The microstructures were examined by SEM, and formed phases were determined by EDS and XRD analysis. Mechanical properties and wear behavior were determined by compression, hardness, and abrasion tests. As a result of these tests, it was determined that composites were produced successfully. It was determined that compressive strength increased with decreasing particle size. And also, small particle size composites showed higher wear resistance.en_US
dc.description.sponsorshipScientific Research Projects Coordination Unit of Karabuk University [KBuBAP-18-YL-149]en_US
dc.description.sponsorshipThis research was financially supported by the Scientific Research Projects Coordination Unit of Karabuk University Grant No. KBuBAP-18-YL-149.en_US
dc.identifier.doi10.1007/s40962-020-00564-6
dc.identifier.endpage1347en_US
dc.identifier.issn1939-5981
dc.identifier.issn2163-3193
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85099422958en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1340en_US
dc.identifier.urihttps://doi.org/10.1007/s40962-020-00564-6
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4302
dc.identifier.volume15en_US
dc.identifier.wosWOS:000608148700001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Int Publ Agen_US
dc.relation.ispartofInternational Journal of Metalcastingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectaluminum matrix compositesen_US
dc.subjectpressure infiltrationen_US
dc.subjectwearen_US
dc.titleMECHANICAL AND WEAR PROPERTIES OF HIGH RATE NIAL PARTICLE-REINFORCED AL COMPOSITES PRODUCED BY PRESSURE INFILTRATION METHODen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu