Effects of using nanofluid, applying a magnetic field, and placing turbulators in channels on the convective heat transfer: A comprehensive review

Basit Öğe Kaydı
dc.authoridMinea, Alina Adriana/0000-0002-2473-184X
dc.authoridGurdal, Mehmet/0000-0003-2209-3394
dc.authoridARSLAN, Kamil/0000-0002-1216-6812
dc.contributor.authorGurdal, Mehmet
dc.contributor.authorArslan, Kamil
dc.contributor.authorGedik, Engin
dc.contributor.authorMinea, Alina Adriana
dc.date.accessioned2024-09-29T16:00:38Z
dc.date.available2024-09-29T16:00:38Z
dc.date.issued2022
dc.departmentKarabük Üniversitesien_US
dc.description.abstractRecent studies in the field of thermal engineering revealed that employing nanofluid as a working fluid in a specific channel, considering both turbulators and magnetic field effect is scarce. Studies on the convective heat transfer performance of the thermal systems focus mostly on the effect of using either nanofluid as a new fluid, magnetic field, or turbulators. This review highlights the single and combined effects of these parameters on the heat transfer enhancement of such systems. Nanofluid type, its volume fraction, channel and turbulator geometry, magnetic field type, and flow regime were considered as the base parameters while the enhancement in heat transfer is evaluated. From a state-of-the-art review, it was noticed that most studies reveal that increasing the volume fraction of nanofluid, magnetic field strength, and Reynolds number can attain an upsurge in the heat transfer in a specific channel. Nevertheless, drawbacks are poorly discussed in the open literature. Regarding the turbulator geometry, which actually limits the magnetohydrodynamic and thermal boundary layer development, its complexity boosts also the convective heat transfer. The maximum heat transfer enhancement was noticed for higher nanoparticle volume fractions, higher magnetic field strengths, and complex geometries in channel flow. The highest heat transfer improvement was obtained for the MWCNT/H2O nanofluid (i.e., between 70% and 190%). With the effect of magnetic field intensity of Ha = 30 applied to the Cu/H2O nanofluid flow, a thermal recovery of 76% was achieved. Concluding, this comprehensive review can be beneficial to researchers working in the field of flow and heat transfer applications with the use of nanofluid, turbulator, and magnetic field together.en_US
dc.identifier.doi10.1016/j.rser.2022.112453
dc.identifier.issn1364-0321
dc.identifier.issn1879-0690
dc.identifier.scopus2-s2.0-85129268476en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.urihttps://doi.org/10.1016/j.rser.2022.112453
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5269
dc.identifier.volume162en_US
dc.identifier.wosWOS:000798975900002en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPergamon-Elsevier Science Ltden_US
dc.relation.ispartofRenewable & Sustainable Energy Reviewsen_US
dc.relation.publicationcategoryDiğeren_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectConvective heat transfer enhancementen_US
dc.subjectNanofluiden_US
dc.subjectMHD flowen_US
dc.subjectTurbulatoren_US
dc.titleEffects of using nanofluid, applying a magnetic field, and placing turbulators in channels on the convective heat transfer: A comprehensive reviewen_US
dc.typeReviewen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu