Dry Sliding Wear Behavior of (GNPs + TiB2)-Reinforced AZ91 Magnesium Matrix Hybrid Composites Produced by Pressure Infiltration Casting Method

dc.authoridCEVIK, Engin/0000-0002-4863-8762
dc.contributor.authorCevik, Engin
dc.contributor.authorGundogan, Murat
dc.date.accessioned2024-09-29T15:54:49Z
dc.date.available2024-09-29T15:54:49Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, TiB2- and graphene-reinforced Mg matrix (AZ91) composites were produced by the pressure infiltration method. The production process was carried out at 750 degrees C and 8 bar pressure in the SF6 gas atmosphere. The hardness, compression, and wear behaviors of the composite materials were examined. In addition, SEM examinations were conducted to understand the wear mechanisms of produced samples. The porosity ratio increased with the increasing graphene ratio. At the end of the measurements, the highest compressive strength was measured as 415 MPa and 140.6 HB in composite containing 0.25 vol% graphene compared to pure matrix and composite containing only TiB2. The highest abrasion resistance was achieved with the addition of 0.25 vol% graphene.en_US
dc.description.sponsorshipScientific Research Projects Coordination Unit of Karabuk University [KBuBAP-18-YL-110]en_US
dc.description.sponsorshipThis research was financially supported by the Scientific Research Projects Coordination Unit of Karabuk University Grant No. KBuBAP-18-YL-110.en_US
dc.identifier.doi10.1007/s40962-020-00552-w
dc.identifier.endpage1259en_US
dc.identifier.issn1939-5981
dc.identifier.issn2163-3193
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85098490095en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1250en_US
dc.identifier.urihttps://doi.org/10.1007/s40962-020-00552-w
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4301
dc.identifier.volume15en_US
dc.identifier.wosWOS:000604193400003en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Int Publ Agen_US
dc.relation.ispartofInternational Journal of Metalcastingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectmagnesium matrix compositesen_US
dc.subjectpressure infiltrationen_US
dc.subjectwearen_US
dc.subjectmechanical propertiesen_US
dc.titleDry Sliding Wear Behavior of (GNPs + TiB2)-Reinforced AZ91 Magnesium Matrix Hybrid Composites Produced by Pressure Infiltration Casting Methoden_US
dc.typeArticleen_US

Dosyalar