An Optimization Study on Resistance Spot Welding of DP600 Sheet Steel via Experiment and Statistical Analysis

Basit Öğe Kaydı
dc.contributor.authorAlzahougi, A.
dc.contributor.authorDemir, B.
dc.contributor.authorElitas, M.
dc.date.accessioned2024-09-29T16:16:06Z
dc.date.available2024-09-29T16:16:06Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractResistance Spot Welding (RSW) is widely used in many automotive, boiler, and ship manufacturing industries. Therefore, the optimization and effectiveness of the RSW process are very useful and cost-efficient processes in addition to improving weld quality. This study used various welding parameters to investigate the optimization of the RSW process of Advanced High Strength Steel (AHSS). RSW was carried out using different welding times, currents, and electrode pressure values. Microstructural analysis, nugget formation, and tensile shear test were performed on samples. This study applied the Taguchi method and ANOVA to set up the welding process and optimize its results. Microstructural characterization showed that the weld nugget microstructures had a high-volume fraction of martensite. Using the Minitab software, Taguchi (DOE) and ANOVA on the tensile shear test results showed that welding current is more effective than clamping pressure on the tensile shear load-bearing capacity (TLBC). However, clamping pressure affects the weld current effects on weld performance. Additionally, the TLBC of RSW samples increases, whereas increasing the clamping pressure leads to a decrease in TLBC and nugget dimensions. Consequently, a detailed analysis of the RSW coefficients and their effects led to optimized results. © 2023, Dr D. Pylarinos. All rights reserved.en_US
dc.description.sponsorshipTOFAŞ Inc.; Karabük Üniversitesi, (KBUBAP-17-KP-463)en_US
dc.identifier.doi10.48084/etasr.5804
dc.identifier.endpage11111en_US
dc.identifier.issn2241-4487
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85167968039en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage11106en_US
dc.identifier.urihttps://doi.org/10.48084/etasr.5804
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8867
dc.identifier.volume13en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherDr D. Pylarinosen_US
dc.relation.ispartofEngineering, Technology and Applied Science Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAHSSen_US
dc.subjectoptimizationen_US
dc.subjectresistance spot weldingen_US
dc.subjecttensile shear load bearing capacityen_US
dc.titleAn Optimization Study on Resistance Spot Welding of DP600 Sheet Steel via Experiment and Statistical Analysisen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu