Adhesive Type's Effects on Adhesive Strength of Densified Reinforced Laminated Wood Obtained from Black Poplar (Populus nigra L.)
Küçük Resim Yok
Tarih
2023
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
North Carolina State Univ Dept Wood & Paper Sci
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Wood material is the most critical indoor and outdoor building element that has not changed since ancient times. Previous studies have determined that the mechanical properties of tree species with low industrial importance, such as poplar wood, can be improved when they are subjected to the densification process. In addition, it has been determined in studies that the lamination process has a positive effect on the mechanical properties of the wood material. This study aimed to assess the impact of the glue type on the bonding strength during the lamination process of the densified black poplar (Populus nigra L.) using reinforcement material. Wood materials were subjected to densification at 140 degrees C for 10 min. Then, the densified boards were laminated in 3 layers with a reinforcement element (KevlartiD (R), fiberglass, and carbon fiber) between the two wooden boards. It was determined that the best result was obtained with the combination of Akfix polyurethane resin type and carbon fiber reinforcement material (8.49 N/mm2).
Açıklama
Anahtar Kelimeler
Densification, Adhesive resistance, Reinforced wood, Laminated wood
Kaynak
Bioresources
WoS Q Değeri
Q2
Scopus Q Değeri
Q3
Cilt
18
Sayı
1
