Production of Hypo-eutectic Al-Si Alloy Based Metal Matrix Composite with Thixomoulding Processing

Basit Öğe Kaydı
dc.contributor.authorAztekin, Hasan
dc.contributor.authorOzyurek, Dursun
dc.contributor.authorCetinkaya, Kerim
dc.date.accessioned2024-09-29T16:06:12Z
dc.date.available2024-09-29T16:06:12Z
dc.date.issued2010
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, hypo-eutectic A356/SiC(p) metal matrix composite production was made with thixomoulding. For this purpose, A356 (Al-Si) alloy was put in the form of powder in <= 50 mu m level produced using gas atomization method. 5%, 10%, 15% and 20% SiC(p) reinforcement was added and they were mixed in a mixer for 30 minutes. Then, the mixed powders were pressed for 1 min under 20 kN force at 823 K mould and 863 and 873 K process temperatures. Optical and scanning electron microscopy (SEM) investigation and sphericity, grain size and micro hardness measurements were carried out on the produced composites. It was observed that thixomoulding resulted in spherical grain structure rather than dendritic structure. The most ideal sphericity was obtained for the specimens produced at 823 mould and 863 K process temperatures. Increasing SiC(p) reinforcement decreased % sphericity rate and increased grain size and hardness.en_US
dc.description.sponsorshipDPT (the State Planning Organization of Turkey) [2003K121110]; DPTen_US
dc.description.sponsorshipThis work has been supported by DPT (the State Planning Organization of Turkey) under project number 2003K121110. The authors are grateful to the DPT for financial support and Karabuk University for the provision of laboratory facilities.en_US
dc.identifier.doi10.1515/HTMP.2010.29.3.169
dc.identifier.endpage178en_US
dc.identifier.issn0334-6455
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-78149257908en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage169en_US
dc.identifier.urihttps://doi.org/10.1515/HTMP.2010.29.3.169
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6702
dc.identifier.volume29en_US
dc.identifier.wosWOS:000283965900006en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWalter De Gruyter & Coen_US
dc.relation.ispartofHigh Temperature Materials and Processesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectThixomouldingen_US
dc.subjectAl/ SiC Composite materialsen_US
dc.titleProduction of Hypo-eutectic Al-Si Alloy Based Metal Matrix Composite with Thixomoulding Processingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu