Dry sliding wear behavior of low carbon dual phase powder metallurgy steels

Basit Öğe Kaydı
dc.authoridTEKELI, SULEYMAN/0000-0001-9826-6875
dc.contributor.authorTekeli, S.
dc.contributor.authorGural, A.
dc.contributor.authorOzyurek, D.
dc.date.accessioned2024-09-29T15:57:52Z
dc.date.available2024-09-29T15:57:52Z
dc.date.issued2007
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDry sliding wear behavior of Fe + 0.3% graphite powder metallurgy processed (PM) steels was investigated at constant sliding speed, load and distance. For this purpose, atomized iron powder was mixed with 0.3% graphite powder and sintered at 1200 degrees C for 30 min under Argon gas atmosphere. The sintered PM specimens were intercritically annealed at different temperatures (728 and 760 degrees C) and then water-quenched. After sintering, a typical ferrite + pearlite microstructure was obtained. In the microstructure of the intercritically annealed PM specimens, a ferrite + martensite microstructure was produced. After wear tests, it was seen that the wear rate of the intercritically annealed specimens was very low in comparison to as-sintered specimen. The specimen intercritically annealed at 728 degrees C showed the lowest wear rate, despite its lower martensite volume fraction. (c) 2006 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2006.03.013
dc.identifier.endpage1688en_US
dc.identifier.issn0261-3069
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-33845319233en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage1685en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2006.03.013
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5053
dc.identifier.volume28en_US
dc.identifier.wosWOS:000245047300032en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSintered Steelsen_US
dc.titleDry sliding wear behavior of low carbon dual phase powder metallurgy steelsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu