Comparison of PSO-PID, FLC and PID in a circulating fluidized bed boiler

Basit Öğe Kaydı
dc.contributor.authorAygun, H.
dc.contributor.authorDemirel, H.
dc.date.accessioned2024-09-29T16:22:14Z
dc.date.available2024-09-29T16:22:14Z
dc.date.issued2011
dc.departmentKarabük Üniversitesien_US
dc.description7th International Conference on Electrical and Electronics Engineering, ELECO 2011 -- 1 December 2011 through 4 December 2011 -- Bursa -- 88625en_US
dc.description.abstractBed temperature is one of the most important parameters in a circulating fluidized bed boiler. Because combustion efficiency increases with rising of bed temperature and also harmful emissions are affected by bed temperature. Classical PID controller can't give fast response to instant changes in boiler. So modern control methods must be used for bed temperature control of circulating fluidized bed boiler. In this study PSO-PID (Particle Swarm Optimization based PID), FLC which are modern controllers, and classical PID controller are used for controlling bed temperature of a circulating fluidized bed boiler and they are compared. Simulation results show that settling time in PSO-PID controller is lower than the other controllers. PSO-PID decreases overshoot like FLC but in classical PID controller overshoots are the biggest. In FLC there are no overshoot. So if overshoot isn't wanted, a FLC must be used and if short settling time is wanted, a PSO-PID controller must be used. © 2011 Chamber of Turkish Electric.en_US
dc.identifier.endpageII380en_US
dc.identifier.isbn978-605010204-8
dc.identifier.scopus2-s2.0-84857241912en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpageII376en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9924
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofELECO 2011 - 7th International Conference on Electrical and Electronics Engineeringen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectElectric control equipmenten_US
dc.subjectElectronics engineeringen_US
dc.subjectBed temperatureen_US
dc.subjectCirculating fluidized bed boileren_US
dc.subjectCombustion efficienciesen_US
dc.subjectFast responseen_US
dc.subjectHarmful emissionsen_US
dc.subjectModern controlen_US
dc.subjectPID controllersen_US
dc.subjectSettling timeen_US
dc.subjectPulverized fuel fired boilersen_US
dc.titleComparison of PSO-PID, FLC and PID in a circulating fluidized bed boileren_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu