The Effects of Cr and Zr Additives on the Microstructure and Mechanical Properties of A356 Alloy

Basit Öğe Kaydı
dc.authoridDispinar, Derya/0000-0001-9550-6933
dc.authoridTEKELI, SULEYMAN/0000-0001-9826-6875
dc.contributor.authorTuncay, Tansel
dc.contributor.authorOzyurek, Dursun
dc.contributor.authorDispinar, Derya
dc.contributor.authorTekeli, Suleyman
dc.date.accessioned2024-09-29T15:54:43Z
dc.date.available2024-09-29T15:54:43Z
dc.date.issued2020
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study has investigated the effect of different amounts of Cr and Zr additions on the microstructure and mechanical properties of A356 alloy modified with strontium. The microstructure and phase examination were performed using an optical microscope, scanning electron microscope and XRD analysis, whereas mechanical properties were investigated via tensile testing and hardness measurements. Two-dimensional Weibull distribution was used to determine the effect of Cr and Zr additions on mechanical properties of A356 alloy. It was found that the most significant effect of Cr and Zr added was over the morphology of Al-Si-Fe intermetallics. The addition of Cr and Zr led to the formation of Cr/Zr-based intermetallics in precipitates and fish-bone-like morphologies. It was observed that increasing the amount of Cr and Zr had resulted in an increase in ductility of A356.en_US
dc.identifier.doi10.1007/s12666-020-01970-4
dc.identifier.endpage1285en_US
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85085099398en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1273en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-020-01970-4
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4216
dc.identifier.volume73en_US
dc.identifier.wosWOS:000531503300001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofTransactions of the Indian Institute of Metalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectA356 alloyen_US
dc.subjectModificationen_US
dc.subjectAlloyingen_US
dc.subjectMechanical propertiesen_US
dc.subjectMicrostructureen_US
dc.titleThe Effects of Cr and Zr Additives on the Microstructure and Mechanical Properties of A356 Alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu