The Wear Properties of In-Situ 7075 Al-Ti Composites Produced by Powder Metallurgy Route

Basit Öğe Kaydı
dc.authoridYILDIRIM, MUSA/0000-0002-2464-1182
dc.contributor.authorAy, H.
dc.contributor.authorOzyurek, D.
dc.contributor.authorYildirim, M.
dc.contributor.authorBostan, B.
dc.date.accessioned2024-09-29T16:01:10Z
dc.date.available2024-09-29T16:01:10Z
dc.date.issued2016
dc.departmentKarabük Üniversitesien_US
dc.description5th International Advances in Applied Physics and Materials Science Congress and Exhibition (APMAS) -- APR 16-19, 2015 -- Oludeniz, TURKEYen_US
dc.description.abstractIn this study, the wear properties of in-situ 7075 Al-Ti composites produced by powder metallurgy route were investigated. Different amount of Ti (2, 4, 6 %) added to gas atomized 7075 Al alloy powders and they were mixed in turbula with 47rpm for 45 minutes. Then the mixed powders were pre-shaped by press under 600 MPa pressure. The samples were cooled in the furnace after sintered at 580 degrees C for 4 hours in the atmosphere controlled furnace. Standard metallographic process such as grinding, polishing and etching were applied to sintered samples. The hardness values were measured. Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD) examines were carried out. The wear tests were performed in a pin-on disc type wear apparatus with 1 ms(-1) sliding speed at six different sliding distance (500-3000 m) under 30 N loads. As a result of studies, hardness values were increased with increasing Ti content, in addition the weight losses were decreased with increasing Ti amount.en_US
dc.identifier.doi10.1063/1.4945956
dc.identifier.isbn978-0-7354-1374-0
dc.identifier.issn0094-243X
dc.identifier.scopus2-s2.0-84984548687en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.urihttps://doi.org/10.1063/1.4945956
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5559
dc.identifier.volume1727en_US
dc.identifier.wosWOS:000375930200001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherAmer Inst Physicsen_US
dc.relation.ispartofProceedings of the 5th International Congress in Advances in Applied Physics and Materials Science Congress & Exhibition (Apmas '15)en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectTien_US
dc.subjectWear propertiesen_US
dc.subject7075 Al alloyen_US
dc.subjectIn-situ compositesen_US
dc.subjectPowder metallurgyen_US
dc.titleThe Wear Properties of In-Situ 7075 Al-Ti Composites Produced by Powder Metallurgy Routeen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu