Investigation of mechanical and microstructural properties of aa5754/aa6013 dissimilar aluminium alloys joined by gmaw and fsw methods
Küçük Resim Yok
Tarih
2021
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Institute of Materials and Machine Mechanics, Slovak Academy of Sciences
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Aluminium alloys AA5XXX and AA6XXX have low density and high yield strength and are frequently used to make air, sea, and land vehicles/technology lighter. Different types of aluminium alloys need to be adaptively assembled together. Therefore, it is important but difficult to weld aluminium alloys. This study investigated the microstructural and mechanical properties of two dissimilar aluminium alloys, AA5754 and AA6013, which were welded using gas metal arc welding (GMAW) and friction stir welding (FSW). Hardness, tensile, bending, and fatigue tests were done on the welded samples. The test results were evaluated and interpreted according to the literature. The weld zone (weld metal, HAZ) of AA5754 and AA6013 aluminium alloys joined by GMAW and FSW showed significant differences. The highest tensile strength and fatigue life were obtained from the FSWed sample after the base metals. The welded samples joined using both welding methods were successfully deformed by 180° without damaging their upper or lower surfaces. © 2021 Institute of Materials and Machine Mechanics, Slovak Academy of Sciences. All rights reserved.
Açıklama
Anahtar Kelimeler
AA5754, AA6013, Fatigue strength, FSW, GMAW, Microstructure
Kaynak
Kovove Materialy
WoS Q Değeri
Scopus Q Değeri
Q3
Cilt
59
Sayı
4
