INVESTIGATION OF MICROSTRUCTURE, MECHANICAL AND CORROSION PROPERTIES OF BIODEGRADABLE Mg-Ag ALLOYS

Basit Öğe Kaydı
dc.authoridAHLATCI, Hayrettin/0000-0002-6766-4974
dc.authoridELEN, LEVENT/0000-0001-8740-7900
dc.contributor.authorElen, Levent
dc.contributor.authorTuren, Yunus
dc.contributor.authorAhlatci, Hayrettin
dc.contributor.authorSun, Yavuz
dc.contributor.authorUnal, Mehmet
dc.date.accessioned2024-09-29T16:07:45Z
dc.date.available2024-09-29T16:07:45Z
dc.date.issued2022
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, microstructure, mechanical, corrosion and corrosive wear properties of Mg-xAg the as-cast and extruded alloys (x: 1, 3 and 5 wt. %Ag) were investigated. According to the experimental results, as the amount of Ag added in the casting alloys increases, the secondary phases (Mg4Ag, Mg54Ag17) emerging in the structure have become more clarified. Furthermore, it was observed that as the amount of Ag increased, the grain size decreased and thus the mechanical properties of the alloys increased. Similarly, the extrusion process enabled the grains to be refined and the mechanical properties to be increased. As a result of the in vitro tests performed, the Mg-1Ag exhibited very bad corrosion properties compared to other alloys. On the other hand, according to corrosive wear tests results, a high wear rate and friction coefficient were found for Mg-5Ag alloys.en_US
dc.identifier.doi10.24425/amm.2022.139680
dc.identifier.endpage900en_US
dc.identifier.issn1733-3490
dc.identifier.issn2300-1909
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85130452526en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage889en_US
dc.identifier.urihttps://doi.org/10.24425/amm.2022.139680
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7129
dc.identifier.volume67en_US
dc.identifier.wosWOS:000850096100001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pasen_US
dc.relation.ispartofArchives of Metallurgy and Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMg-Ag alloysen_US
dc.subjectbiodegradableen_US
dc.subjectmechanical propertiesen_US
dc.subjectmicrostructure propertiesen_US
dc.subjectcorrosionen_US
dc.titleINVESTIGATION OF MICROSTRUCTURE, MECHANICAL AND CORROSION PROPERTIES OF BIODEGRADABLE Mg-Ag ALLOYSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu