The effect of porosity on the mechanical properties of Ti-8Nb-8Zr-8Cu alloy
dc.authorid | DEMIRTAS, Huseyin/0000-0002-2442-2158 | |
dc.contributor.author | Demirtas, Huseyin | |
dc.date.accessioned | 2024-09-29T16:02:41Z | |
dc.date.available | 2024-09-29T16:02:41Z | |
dc.date.issued | 2022 | |
dc.department | Karabük Üniversitesi | en_US |
dc.description.abstract | The present study investigated the mechanical performance of Ti-8Nb-8Zr-8Cu (at.-%) alloys containing different porosity levels. Metallographic examination and phase analysis of samples was performed by scanning electron microscope (SEM), optical microscopy (OM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD) measurements. The mechanical properties were detected by uniaxial compression test, micro and macro hardness measurements. The wear behaviour was determined by a dry wear test on the bulk sample. The ultimate compressive strength decreased from 1077.30 to 344.65 MPa with 50% porosity and the modulus of elasticity from 15.6 to 9.5 GPa. These values show that it may be suitable for bone replacement considering the stress shield effect. | en_US |
dc.description.sponsorship | Scientific Research Projects Coordination Unit of Karabuk University [KBUBAP-22-YL-048] | en_US |
dc.description.sponsorship | This work was supported by the Scientific Research Projects Coordination Unit of Karabuk University [Project No: KBUBAP-22-YL-048]. | en_US |
dc.identifier.doi | 10.1080/02670836.2022.2081447 | |
dc.identifier.endpage | 1126 | en_US |
dc.identifier.issn | 0267-0836 | |
dc.identifier.issn | 1743-2847 | |
dc.identifier.issue | 14 | en_US |
dc.identifier.scopus | 2-s2.0-85131689809 | en_US |
dc.identifier.scopusquality | Q2 | en_US |
dc.identifier.startpage | 1118 | en_US |
dc.identifier.uri | https://doi.org/10.1080/02670836.2022.2081447 | |
dc.identifier.uri | https://hdl.handle.net/20.500.14619/5640 | |
dc.identifier.volume | 38 | en_US |
dc.identifier.wos | WOS:000807595200001 | en_US |
dc.identifier.wosquality | Q3 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | Taylor & Francis Ltd | en_US |
dc.relation.ispartof | Materials Science and Technology | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Porosity | en_US |
dc.subject | Ti alloy | en_US |
dc.subject | powder metallurgy | en_US |
dc.subject | ammonium carbonate | en_US |
dc.subject | biomaterials | en_US |
dc.title | The effect of porosity on the mechanical properties of Ti-8Nb-8Zr-8Cu alloy | en_US |
dc.type | Article | en_US |