Determination of fatigue and static strength of scots pine and beech wood
Küçük Resim Yok
Tarih
2015
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Statny Drevarsky Vyskumny Ustav
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, fatigue and static strength of Scots pine (Pinus sylvestris L.) and beech (Fagus orientalis L.) woods were investigated. The fatigue and static strength were conducted using a three point bending test-rig. The specimens were prepared according to ISO 3129 (1975) and fatigue and static bending test were carried out according to ISO 3133 (1975). The fatigue test was carried out at 80, 70, 60, 50 and 40 % stress level that corresponded to specific percentage of material's ultimate strength modulus of rupture (MOR). However the microstructures of fatigue failures were observed by using scanning electron microscope (SEM). The results were indicated that, the fatigue life of Scots pine wood amounted to over 1 million cycle when the stress level was 40 % of MOR for Scots pine and 50 % MOR for Beech. In general, fatigue life decreased as stress level increased and vice versa. The allowable design stress is based on some percentage of MOR for furniture design. On this account, the allowable design stresses for Beech and Scots pine could be set at 50 and 40 % respectively.
Açıklama
Anahtar Kelimeler
Beech, Fatigue, Modulus Of Rupture, Scots Pine, Static
Kaynak
Wood Research
WoS Q Değeri
Scopus Q Değeri
Q2
Cilt
60
Sayı
4
