CBN cutting tool wear during machining of particulate reinforced MMCs

dc.contributor.authorCiftci, I
dc.contributor.authorTurker, M
dc.contributor.authorSeker, U
dc.date.accessioned2024-09-29T16:00:56Z
dc.date.available2024-09-29T16:00:56Z
dc.date.issued2004
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this experimental study, three SiC/Al metal matrix composites (MMCs) with SiC particles of 30, 45 and 110 mum in mean sizes were produced using a melt stirring-squeeze casting route. Machining tests were carried out on the MMCs using cubic boron nitride (CBN) cutting tools at various cutting speeds under a constant feed rate and depth of cut. The effect of reinforcement particulate sizes and cutting speeds on tool wear was investigated. Furthermore, surface roughness measurements were also carried out on the machined surfaces. The results showed that tool wear was mainly dominated by flank wear and strongly influenced by reinforcement particulate size. The MMC containing SiC particles of 110 mum proved to be unsuitable for the machining operation using CBN cutting tools due to the heavy fracture of the cutting edge and nose. In the composites reinforced with SiC particles of 30 and 45 mum, 150 m/min cutting speeds led to the lowest tool flank wear values while 100 and 200 m/min cutting speeds resulted in higher tool flank wear values. (C) 2004 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.wear.2004.07.005
dc.identifier.endpage1046en_US
dc.identifier.issn0043-1648
dc.identifier.issn1873-2577
dc.identifier.issue9-10en_US
dc.identifier.scopus2-s2.0-5544252720en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1041en_US
dc.identifier.urihttps://doi.org/10.1016/j.wear.2004.07.005
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5428
dc.identifier.volume257en_US
dc.identifier.wosWOS:000224747400019en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofWearen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjecttool wearen_US
dc.subjectCBNen_US
dc.subjectmachiningen_US
dc.subjectmetal matrix composites (MMCs)en_US
dc.titleCBN cutting tool wear during machining of particulate reinforced MMCsen_US
dc.typeArticleen_US

Dosyalar