The effect of diffuser and non-diffuser runner systems on the mechanical properties of A356 alloy

Basit Öğe Kaydı
dc.contributor.authorTunçay, T.
dc.contributor.authorTekeli, S.
dc.contributor.authorÖzyürek, D.
dc.date.accessioned2024-09-29T16:22:08Z
dc.date.available2024-09-29T16:22:08Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, runner systems which have equal cross-sectional area and different forms of cross-sectional diffuser and non-diffuser runner system's effects on mechanical properties of A356 aluminium alloy, depending on the movement of the liquid metal, were investigated. The aim of the study is to reduce casting defects due to inclusion caused by runner systems such as gas or shrinkage porosity. Therefore, the horizontal runners have been extended by using diffusers having cross-sectional area equivalent with a different cross-sectional shape (square, rectangular and circular outlet). Tensile test specimens were prepared from the plates of casting A356 alloy and tensile tests were performed. Obtained results were examined Weibull statistical analysis. As a result, one hand, it is observed that the turbulence effect on liquid metal has been decreased the highest tensile results and Weibull modulus has been appeared on the samples which have horizontal runners produced by using a square section diffuser in designed horizontal diffuser. On the other hand, according to Scanning Electron Microscope (SEM) analysis on fracture surfaces, fracture has been observed in the area of intermetallic secondary phases (oxides etc.) and in area with gas or shrinkage porosity.en_US
dc.identifier.endpage249en_US
dc.identifier.issn1300-1884
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84880901010en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage241en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9844
dc.identifier.volume28en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAluminum sand castingen_US
dc.subjectMovement of the liquid metalen_US
dc.subjectOxide filmen_US
dc.subjectRunner systemsen_US
dc.titleThe effect of diffuser and non-diffuser runner systems on the mechanical properties of A356 alloyen_US
dc.title.alternativeDifüzörlü ve difüzörsüz yolluk sistemlerinin A356 alaşiminin mekanik özelliklerine etkisien_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu