Corrosion Resistance of Interstitial Free Steel and Mg Alloys Sheets Joined by Mechanical Clinching

Basit Öğe Kaydı
dc.authoridZEYVELI, METIN/0000-0003-4220-9403
dc.authoridKARA, ISMAIL HAKKI/0000-0001-8425-5649
dc.contributor.authorMhawesh, Ziadoon Tareq
dc.contributor.authorKara, Ismail Hakki
dc.contributor.authorZeyveli, Metin
dc.date.accessioned2024-09-29T15:54:32Z
dc.date.available2024-09-29T15:54:32Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe corrosion resistance of mechanically clinched interstitial free (IF) steel-Mg joints was investigated by potentiodynamic and immersion corrosion tests in 3.5% NaCl solution at 25 C. The initial microstructure influenced the corrosion performance of studied joints due to the formation of secondary phases and their volume fraction changed the galvanic corrosion response of Mg materials. Nd-La addition enhanced the corrosion resistance of IF-Mg joints, where two times higher corrosion resistance was obtained by IF-AZ31B-0.5Nd-0.1La (1110 mils/year (mpy)) joint than IF-AZ31B (3670 mpy). The cross section locations had different secondary phase (SP) volume fraction, SP-distribution and grain orientations which altered the corrosion behavior of joined materials. After the clinching process, the deformed section of IF-AZ31B-0.5Nd-0.1La and IF-AZ31B showed lower corrosion rate than undeformed sections 1040 and 1110 mpy and 2820 and 3670 mpy, respectively.en_US
dc.description.sponsorshipScientific Research Projects Coordination Unit of Karabuk University [FYL-2020-2254]en_US
dc.description.sponsorshipThis work was financially supported by the Scientific Research Projects Coordination Unit of Karabuk University, Project Number: FYL-2020-2254.en_US
dc.identifier.doi10.1007/s11665-022-07221-5
dc.identifier.endpage2800en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-85136159821en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage2793en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-022-07221-5
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4116
dc.identifier.volume32en_US
dc.identifier.wosWOS:000842595300003en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Engineering and Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAZ31Ben_US
dc.subjectcorrosionen_US
dc.subjectLaen_US
dc.subjectmechanical clinchingen_US
dc.subjectNden_US
dc.titleCorrosion Resistance of Interstitial Free Steel and Mg Alloys Sheets Joined by Mechanical Clinchingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu