Effects of machining parameters on surface roughness and macro surface characteristics when the machining of Al-6082 T6 alloy using AWJT

Basit Öğe Kaydı
dc.authoridkartal, fuat/0000-0002-2567-9705
dc.contributor.authorKartal, Fuat
dc.contributor.authorYerlikaya, Zekeriya
dc.contributor.authorGokkaya, Hasan
dc.date.accessioned2024-09-29T15:57:55Z
dc.date.available2024-09-29T15:57:55Z
dc.date.issued2017
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study analyzes the effects of machining parameters on the surface roughness and macro surface characteristics when machining Al-6082 T6 alloy of empty set30 and 240 mm in size using abrasive water jet (AWJ) turning processes. The material removal tests were conducted using a computer numerical control (CNC) abrasive jet cutting machine for different parameters of nozzle feed rate (10, 15, 20 and 25 mm.min(-1)), abrasive flow rate (50, 150, 250 and 350 g.min(-1)), spindle speed (25, 50, 75 and 100 min(-1)) and standoff distance (2, 5, 8 and 11 mm). Pump pressure at 350 MPa, abrasive type of Garnet and size of 120 Mesh, and nozzle diameter of 0.75 mm are kept constant throughout the experiments. When macro surface characteristics were analyzed, it was found that increased spindle speed, decreased nozzle feed rate, increased abrasive flow rate and lower standoff distance resulted in smoother surfaces. According to the findings of this study, best results were obtained when spindle speed and abrasive flow rate were increased. (C) 2016 Elsevier Ltd. All rights reserved.en_US
dc.description.sponsorshipKastamonu University Scientific Research Fund [KUBAP-01/2013-63]en_US
dc.description.sponsorshipThe authors are grateful for the financial support of Kastamonu University Scientific Research Fund, Grant No.: KUBAP-01/2013-63.en_US
dc.identifier.doi10.1016/j.measurement.2016.10.007
dc.identifier.endpage222en_US
dc.identifier.issn0263-2241
dc.identifier.issn1873-412X
dc.identifier.scopus2-s2.0-84992456044en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage216en_US
dc.identifier.urihttps://doi.org/10.1016/j.measurement.2016.10.007
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5099
dc.identifier.volume95en_US
dc.identifier.wosWOS:000390495400024en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMeasurementen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAbrasive water jeten_US
dc.subjectTurningen_US
dc.subjectAl-6082 T6 alloyen_US
dc.subjectAverage surface roughnessen_US
dc.subjectMacro surface characteristicsen_US
dc.titleEffects of machining parameters on surface roughness and macro surface characteristics when the machining of Al-6082 T6 alloy using AWJTen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu