Cutting parameter optimization in shoulder milling of commercially pure molybdenum

Basit Öğe Kaydı
dc.authoridciftci, ibrahim/0000-0001-7875-6324
dc.authoridGOKCE, Huseyin/0000-0002-2113-1611
dc.contributor.authorGokce, Huseyin
dc.contributor.authorCiftci, Ibrahim
dc.contributor.authorDemir, Halil
dc.date.accessioned2024-09-29T15:54:46Z
dc.date.available2024-09-29T15:54:46Z
dc.date.issued2018
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDue to its superior properties such as high melting point (2617 degrees C), high thermal conductivity and low thermal expansion at higher temperatures, molybdenum is a refractory metal and is used for making critical parts in defense, space, electronics and nuclear industries. High cost of molybdenum makes the selection of suitable cutting conditions imperative in machining operations in order to obtain the required surface quality and dimensional accuracy. In this study, suitable cutting tools and cutting parameters were aimed to be determined in terms of cutting forces (F-c) and average surface roughness (R-a) when shoulder milling commercially pure molybdenum. The milling tests were carried out at 0.05, 0.1, 0.15, 0.2 mm/tooth feed rates and 75, 100, 125, 150 m/min cutting speeds using four different cutting tools. The Taguchi's experimental design (L16 orthogonal array) technique was implemented. Analysis of variance was used to determine the effects of cutting tools and cutting parameters on R-a and F-c. The results showed that the feed rate is the most influential parameter for F-c while the cutting speed is for R-a.en_US
dc.description.sponsorshipKarabuk University [KBU-BAP-15/2DR-002]en_US
dc.description.sponsorshipThe authors would like to thank Karabuk University for provision of funding with the Project KBU-BAP-15/2DR-002 and Cankiri Karatekin University for provision of laboratory facilities.en_US
dc.identifier.doi10.1007/s40430-018-1280-8
dc.identifier.issn1678-5878
dc.identifier.issn1806-3691
dc.identifier.issue7en_US
dc.identifier.scopus2-s2.0-85049300173en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s40430-018-1280-8
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4278
dc.identifier.volume40en_US
dc.identifier.wosWOS:000437232700002en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofJournal of the Brazilian Society of Mechanical Sciences and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectPure molybdenumen_US
dc.subjectANOVAen_US
dc.subjectSurface roughnessen_US
dc.subjectCutting forcesen_US
dc.titleCutting parameter optimization in shoulder milling of commercially pure molybdenumen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu