TOZ METAL ÇELİKLERDE MEKANİK ALAŞIMLAMANIN MİKROYAPI VE MEKANİK ÖZELLİKLERE ETKİSİNİN ARAŞTIRILMASI

dc.contributor.authorErman, Selim
dc.date.accessioned2020-01-16T08:55:39Z
dc.date.available2020-01-16T08:55:39Z
dc.date.issued2020-01-10
dc.departmentLisansüstü Eğitim Enstitüsü, İmalat Mühendisliği Ana Bilim Dalıen_US
dc.description.abstractBu çalışmada toz metalurjisi üretim yöntemlerinden olan mekanik alaşımlamanın çeliklerin mikroyapısı ve mekanik özelliklerine katkısının araştırılması ele alınmıştır. Öncelikle uygun toz- bilya oranı (1/5, 1/7, 1/10), bilya çapı (4mm, 5mm ve 6mm) ve mekanik alaşımlama süresi (15dk, 30dk, 1saat) belirlenmiştir. Uygun toz-bilya oranı 1/10, uygun bilya çapı 5mm ve uygun mekanik alaşımlama süresi 15dk olarak bulunmuştur. Bahsedilen uygunluklar mekanik alaşımlama yöntemi ile alaşımlı çelikler (0,55C+5Ni+Fe, 0,55C+10Ni+Fe) ve alaşımsız çelik (0,55C+Fe) üzerinden elde edilen numunelerin mekanik alaşımlamasız numuneler ile karşılaştırılması sonucu bulunmuştur. Çalışmada uygun oranlarda elde edilen tozlar 1 saat turbula da karıştırılmıştır. Ardından MA işlemlerinden geçirilip, 700 Mpa presleme basıncı altında çekme numunesi formunda preslenmiştir. Sinterleme sıcaklığı 1400o C, argon atmosferinde yapılmıştır. Çekme deneyi, sertlik deneyi, mikroyapı ve SEM incelemeleri ardından bulunan sonuçlar değerlendirmeye alınmıştır.en_US
dc.description.abstractIn this study, the contribution of mechanical alloying, which is one of the production methods of powder metallurgy, to the microstructure and mechanical properties of steels was examined. Firstly, suitable powder-ball ratio (1/5, 1/7, 1/10), ball diameter (4mm, 5mm and 6mm) and mechanical alloying time (15min, 30min, 1h) were determined. The appropriate powder-ball ratio was 1/10, the appropriate ball diameter was 5mm and the appropriate mechanical alloying time was found to be 15min. Said conformities were obtained by comparison of the samples obtained from alloyed steels (0,55C + 5Ni + Fe, 0,55C + 10Ni + Fe) and unalloyed steel (0,55C + Fe) by mechanical alloying method with non-mechanical alloyed samples. The powders obtained in the appropriate proportions were mixed in the turbula for 1 hour. It was then subjected to MA treatment and pressed in the form of a tensile sample under a pressing pressure of 700 MPa. The sintering temperature was 1400o C, argon atmosphere. The results obtained after tensile test, hardness test, microstructure and SEM investigations were evaluated."en_US]
dc.identifier.urihttps://hdl.handle.net/20.500.14619/596
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=aEzj_IdWAsjiSAfK3qwrBq17yc1uqZm71m8Da0yUWYqtFN8poWrvGxWdVURupjf1
dc.identifier.yoktezid605632en_US
dc.language.isotren_US
dc.relation.publicationcategoryTezen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMechanical alloyingen_US
dc.subjectpowder metallurgyen_US
dc.subjectalloy steelsen_US
dc.subjectnon-alloy steelsen_US
dc.subjectnickel alloys.en_US
dc.subjectMekanik alaşımlamaen_US
dc.subjecttoz metalurjisien_US
dc.subjectalaşımlı çelikleren_US
dc.subjectalaşımsız çelikleren_US
dc.subjectnikel alaşımları.en_US
dc.titleTOZ METAL ÇELİKLERDE MEKANİK ALAŞIMLAMANIN MİKROYAPI VE MEKANİK ÖZELLİKLERE ETKİSİNİN ARAŞTIRILMASIen_US
dc.title.alternativeINVESTIGATION OF THE EFFECT OF MECHANICAL ALLOYS OF POWDER METAL STEELS ON MICRO STRUCTURE AND MECHANICAL PROPERTIESen_US
dc.typeMaster Thesisen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
10317664.pdf
Boyut:
3.25 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.71 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: