An Investigation of the Wear Performance of Aged Inconel 718 Superalloy by the Fuzzy Logic Approach
Küçük Resim Yok
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the effects of delta, gamma' and gamma '' phases on the microstructure and wear behavior of Inconel 718 alloy, produced by powder metallurgy technique, were analyzed experimentally and a fuzzy logic model was developed for the weight loss prediction after the wear tests. Aging process was carried out in two stages: firstly at 720 degrees C for 8h and then at 620 degrees C for 6-10h. Wear tests were performed at five different sliding distances (400-2000m) for 1ms(-1) sliding speed under 30 to 60N loads. Weight loss prediction model was developed by using fuzzy logic method. SEM images of Inconel 718 alloy aged for 6, 8 and 10h at 620 degrees C show intermetallic precipitates formed around particle boundaries. XRD examinations showed orthorhombic delta(Ni3Nb), BCT gamma '' (Ni3Nb), FCC gamma' Ni-3(Al,Ti) hexagonal Laves (Fe2Nb) phases formed in the structure with the same chemical composition and different crystal lattice. Accurate estimates were obtained in the developed fuzzy logic model. It was illustrated that this fuzzy logic model can be used successfully for the prediction of weight loss in wear tests of Inconel 718 alloy that was produced by powder metallurgy method.
Açıklama
Anahtar Kelimeler
aging parameters, fuzzy logic, Inconel 718 superalloy, wear behavior
Kaynak
Journal of Materials Engineering and Performance
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
28
Sayı
5
