Finite Element Analysis of Thrust Force in Drilling of Al2014 Aluminum Alloy

Basit Öğe Kaydı
dc.contributor.authorKorkmaz, M.E.
dc.contributor.authorÇakiroglu, R.
dc.contributor.authorYagar, N.
dc.contributor.authorÖzmen, R.
dc.contributor.authorGünay, M.
dc.date.accessioned2024-09-29T16:16:20Z
dc.date.available2024-09-29T16:16:20Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe purpose of this work is to compare the experimental and simulational results of the thrust force in drilling of the Al2014 aluminum alloy with the uncoated cemented carbide tool. In the experimental study, drilling was performed using cutting parameters (cutting speed and feed rate) at different levels. Numerical analyzes for thrust force were performed using the ThirdWave Advantages simulation program, which is based on the finite element method. With constant feed rates of 0,1, 0,2 and 0,3 mm / rev, the thrust force decreased by 9,1%, 12,8% and 18,6%, respectively, with the cutting speed increased by 35%. At constant cutting speeds of 170, 200 and 230, the thrust force increased by 23,9%, 16,1% and 11%, respectively, by increasing the feed rate from 0,1 to 0,3 mm / rev. It has been determined that the thrust force decreases with increasing the cutting speed and increases with the increasing feed rate. The results of drilling simulation performed by finite element method were similar to experimental results. As a result of the study, it was determined that there was an average difference of 7% between the experimentally measured thrust force and the force values obtained as a result of the simulation. Finally, the applicability of the finite element model was proved. © 2019, TUBITAK. All rights reserved.en_US
dc.identifier.doi10.31202/ecjse.449701
dc.identifier.endpage199en_US
dc.identifier.issn2148-3736
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85088652321en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage193en_US
dc.identifier.trdizinid386053en_US
dc.identifier.urihttps://doi.org/10.31202/ecjse.449701
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/386053
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9016
dc.identifier.volume6en_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isotren_US
dc.publisherTUBITAKen_US
dc.relation.ispartofEl-Cezeri Journal of Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAl2014en_US
dc.subjectFinite element methoden_US
dc.subjectSimulationen_US
dc.subjectThrust forceen_US
dc.titleFinite Element Analysis of Thrust Force in Drilling of Al2014 Aluminum Alloyen_US
dc.title.alternativeAl2014 Alüminyum Ala?ımının Delinmesinde ?tme Kuvvetinin Sonlu Elemanlar Yöntemi ?le Analizien_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu