Resistance spot weldability of deformed TRIP800 steel: Various parameters were investigated for obtaining optimum tensile shear strength, weld button geometry, and electrode indentation
Küçük Resim Yok
Tarih
2016
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
American Welding Society
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In order to simulate automotive manufacturing conditions, the spot weldability of cold-deformed, in tension by 10%, TRIP800 steels was investigated in this study. Tensile shear strength and failure mode associated with button geometry and electrode indentations were also evaluated, and weld lobe was drawn for resistance spot-welded deformed TRIP800 steel. The microstructure of the weldment was evaluated and the hardness profile of the weldment was also determined. It was found that the properties of the weldment are directly related to parameters used for the process and deformation of base metal prior to welding. It was found that the button diameter and button size ratio of deformed TRIP800 steel spot welds should be at least 4t and 0.14-0.30, respectively, for pullout failure mode, acceptable shear strength, and surface quality. Copyright © 2016 by American Welding Society in both printed and electronic formats.
Açıklama
Anahtar Kelimeler
Cold Deformation, Resistance Spot Weld, Weld Lobe Diagram, Welding Parameters
Kaynak
Welding Journal
WoS Q Değeri
Scopus Q Değeri
Q2
Cilt
95
Sayı
3
