Effect of the matrix structure on the friction coefficient and pin tempureture of ductile iron under dry sliding conditions
Küçük Resim Yok
Tarih
2007
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the effect of the matrix structure on the dry sliding wear behaviour, friction coefficient and pin temperature of ductile irons was investigated. Wear tests were carried out at normal atmospheric conditions and room temperature on a pin on disc type tester at constant sliding speed (1ms-1) and sliding distance (3.6 km) under various sliding loads in a range of 20 to 60 N. The worn surfaces were examined by scanning electron microscopy (SEM). Wear rate of as-cast ferritic ductile irons increased with increasing test load, whilst that of as-cast pearlitic irons decreased. Tests revealed that, as-cast pearlitic ductile iron exhibited higher friction coefficient and friction temperature than as-cast ferritic ductile iron. The experimental results showed that the friction temperature increased with decreasing the friction coefficient of as-cast ferritic and pearlitic ductile irons.
Açıklama
Anahtar Kelimeler
Ductile iron, Wear
Kaynak
Journal of the Faculty of Engineering and Architecture of Gazi University
WoS Q Değeri
Scopus Q Değeri
Q2
Cilt
22
Sayı
3
