Finite Element Modelling of Cutting Forces and Power Consumption in Turning of AISI 420 Martensitic Stainless Steel

Basit Öğe Kaydı
dc.authoridKORKMAZ, Mehmet Erdi/0000-0002-0481-6002
dc.contributor.authorKorkmaz, Mehmet Erdi
dc.contributor.authorGunay, Mustafa
dc.date.accessioned2024-09-29T15:54:44Z
dc.date.available2024-09-29T15:54:44Z
dc.date.issued2018
dc.departmentKarabük Üniversitesien_US
dc.description.abstractMartensitic stainless steels have high hardenability, good strength and good corrosion resistance; however, high power consumption is encountered in machining operations due to their hard machinability. The consumption should be eliminated for cleaner production in terms of sustainable machining. Therefore, this study aims modelling of cutting forces and power consumption in turning of AISI 420 martensitic stainless steel based on finite element method. Finite element modelling of cutting forces is preferred to estimate optimum cutting parameters for less power consumption. In this regard, finite element simulations are performed based on three different levels as cutting speed, depth of cut and feed rate. Depth of cut could be assessed as the most important factor with percentage contribution ratio of 49.55% in respect of the power consumption. The average of 7% difference is achieved between experimental and simulated cutting forces. The deviation of 4.5% is evaluated between experimental results and simulation outputs by means of comparing the power consumption. The finite element modelling of cutting forces and power consumption is quite compatible with the experimental results, and it can be performed by high accuracy without excessive machining experiments of difficult-to-cut materials.en_US
dc.identifier.doi10.1007/s13369-018-3204-4
dc.identifier.endpage4870en_US
dc.identifier.issn2193-567X
dc.identifier.issn2191-4281
dc.identifier.issue9en_US
dc.identifier.scopus2-s2.0-85051439614en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage4863en_US
dc.identifier.urihttps://doi.org/10.1007/s13369-018-3204-4
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4240
dc.identifier.volume43en_US
dc.identifier.wosWOS:000441240000036en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofArabian Journal For Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAISI 420en_US
dc.subjectCutting forceen_US
dc.subjectPower consumptionen_US
dc.subjectTurningen_US
dc.subjectFinite element methoden_US
dc.titleFinite Element Modelling of Cutting Forces and Power Consumption in Turning of AISI 420 Martensitic Stainless Steelen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu