The effects of microalloyed steel pre-heat treatment on microstructure and machinability

Basit Öğe Kaydı
dc.contributor.authorDemir, H.
dc.date.accessioned2024-09-29T16:21:14Z
dc.date.available2024-09-29T16:21:14Z
dc.date.issued2008
dc.departmentKarabük Üniversitesien_US
dc.description.abstractAn extensive study was performed in finish turning of the following microalloyed steels: as received (14.3 HRc), water-cooled (44.9 HRc), air-cooled (14.41 HRc) and furnace-cooled (9.1 HRc). The turning tests were carried out using multi-layer coated cemented carbide tools at four different cutting speeds (60, 90, 120, and 150 m/min) while feedrate and depth of cut were kept constant at 0.1 mm/rev and 1 mm, respectively. The influences of workpiece microstructure and cutting speed on cutting forces and workpiece surface roughness were investigated. The worn parts of the cutting tools were also examined under a scanning electron microscope (SEM). The results showed that cutting speed significantly affected the machined surface roughness values. However, cutting forces were not influenced significantly by workpiece microstructure and cutting speed except for water cooled specimen. © 2007 Springer-Verlag London Limited.en_US
dc.identifier.doi10.1007/s00170-007-1050-8
dc.identifier.endpage1046en_US
dc.identifier.issn1433-3015
dc.identifier.issue9-10en_US
dc.identifier.scopus2-s2.0-38349151319en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1041en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-007-1050-8
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9630
dc.identifier.volume35en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCutting forcesen_US
dc.subjectMicroalloyed steelsen_US
dc.subjectSurface roughnessen_US
dc.subjectTurningen_US
dc.titleThe effects of microalloyed steel pre-heat treatment on microstructure and machinabilityen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu