Microstructure, Hardness, Wear Behaviours of A356/Fly Ash Composites Fabricated by Powder Metallurgy Method

Basit Öğe Kaydı
dc.contributor.authorYildirim, Musa
dc.contributor.authorSolakoglu, Simge
dc.date.accessioned2024-09-29T15:54:43Z
dc.date.available2024-09-29T15:54:43Z
dc.date.issued2022
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, we investigated the microstructure and wear behaviour of A356/fly ash composites fabricated using the powder metallurgy method. Fly ash was added to A356 Al alloy in four different ratios by weight and mechanically milled for 1 h. The milled composite powders were pre-formed under 800 MPa pressure and sintered for 1 h under vacuum at 590 degrees C. The microstructures of the produced samples were examined by optical microscope, SEM, EDS and XRD. The hardness measurements and wear tests were performed to determine the effect of fly ash content on the properties of the samples. As a result of the study, it was found that the hardness value increased with the increasing fly ash amount up to 2 wt% and decreased after 2 wt%. The wear test results were consistent with the hardness results. The maximum weight loss occurred in the composite containing 4 wt% fly ash.en_US
dc.identifier.doi10.1007/s12666-022-02677-4
dc.identifier.endpage2957en_US
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.issue11en_US
dc.identifier.scopus2-s2.0-85134329242en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage2949en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-022-02677-4
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4220
dc.identifier.volume75en_US
dc.identifier.wosWOS:000825894700001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofTransactions of the Indian Institute of Metalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectA356 aluminium alloyen_US
dc.subjectFly ashen_US
dc.subjectCompositeen_US
dc.subjectPowder metallurgyen_US
dc.subjectWear behavioursen_US
dc.titleMicrostructure, Hardness, Wear Behaviours of A356/Fly Ash Composites Fabricated by Powder Metallurgy Methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu