Effect of abrasive water jet turning parameters on depth of cut of AISI 1050 steel

Basit Öğe Kaydı
dc.contributor.authorKartal, F.
dc.contributor.authorGökkaya, H.
dc.date.accessioned2024-09-29T16:22:06Z
dc.date.available2024-09-29T16:22:06Z
dc.date.issued2014
dc.departmentKarabük Üniversitesien_US
dc.descriptionAir France; Best High Pressure and Drilling Technology (BHDT); et al.; OMAX Corporation; TST; VLN Advanced Technologies Incen_US
dc.description22nd International Conference on Water Jetting 2014: Advances in Current and Emerging Markets -- 3 September 2014 through 5 September 2014 -- Haarlem -- 110163en_US
dc.description.abstractThis study analyzes the depth of cut as an output of experiments using abrasive water jet turning (AWJT) on AISI 1050 steel material and machining parameters were optimized using Taguchi method. Three different nozzle feed rates (0.01, 0.017 and 0.09 mm/min), abrasive mass flow rates (50, 200 and 350 g/min), lathe spin rates (500, 1500 and 2500 rpm), nozzle distances (2,10 and 18 mm) and two different nozzle diameters (0.75 and 1.3 mm) were used as machining parameter values. Taguchi's LI8 orthogonal array was adopted for the test design. The impact of parameters on depth of cut was statistically examined using analysis of variance and S/N ratios obtained. As a result of the tests, Nozzle feed rate proved to have the highest impact on the depth of cut with its rate of 75.38%. Using a 0.75 mm nozzle diameter led to decreased depth of cut. Increasing the spindle speed proved to increase the depth of cut. © BHR Group 2014 Water Jetting 22.en_US
dc.identifier.endpage196en_US
dc.identifier.isbn978-163439443-7
dc.identifier.scopus2-s2.0-84922921573en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage189en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9816
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherBHR Group Limiteden_US
dc.relation.ispartofBHR Group - 22nd International Conference on Water Jetting 2014en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAbrasive water jeten_US
dc.subjectAISI 1050en_US
dc.subjectDepth of cuten_US
dc.subjectTaguchi methoden_US
dc.subjectTurningen_US
dc.titleEffect of abrasive water jet turning parameters on depth of cut of AISI 1050 steelen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu