Optimization and measurement of flank wear and surface roughness via Taguchi based grey relational analysis

Basit Öğe Kaydı
dc.authorid/0000-0003-3300-1336
dc.contributor.authorPeksen, Hilmi
dc.contributor.authorKalyon, Ali
dc.date.accessioned2024-09-29T16:02:50Z
dc.date.available2024-09-29T16:02:50Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study examined experimentally and statistically the machinability of AISI 430 stainless steel on a lathe using two type different coated tool inserts, three various cutting speeds (80, 140, 200 m/min) and three various feed rates (0.75, 1.5, 2.25 mm/rev). Experimental studies were carried out using a coolant and cutting depth of 1.5 mm was used constant under all experiment conditions. In the machinability tests, the impact of turning parameters and levels on Ra and the amount of wear on the cutting tool were examined. The impact of machinability parameters on VB and Ra were calculated using analysis of variance, which determined that feed rate was the most powerful machining parameter for the VB and Ra. Taguchi-based gray relational analysis was performed to find out the ideal machining orders for Ra and VB. According GRA, the percentage of improvement in the gray relational degree was calculated as 69.1%. As a result of this work, multiple performance outputs (surface roughness-flank wear) were improved considerably in machining of difficult-to-machine AISI 430 stainless steel.en_US
dc.identifier.doi10.1080/10426914.2021.1926497
dc.identifier.endpage1874en_US
dc.identifier.issn1042-6914
dc.identifier.issn1532-2475
dc.identifier.issue16en_US
dc.identifier.scopus2-s2.0-85106282160en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1865en_US
dc.identifier.urihttps://doi.org/10.1080/10426914.2021.1926497
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5723
dc.identifier.volume36en_US
dc.identifier.wosWOS:000650630100001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofMaterials and Manufacturing Processesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAISI430en_US
dc.subjectcutting tool wearen_US
dc.subjectpvden_US
dc.subjectsurface roughnessen_US
dc.subjectmachinabilityen_US
dc.subjectstainless steelen_US
dc.subjecttaguchien_US
dc.subjectoptimizationen_US
dc.subjectgray relationen_US
dc.subjectanovaen_US
dc.titleOptimization and measurement of flank wear and surface roughness via Taguchi based grey relational analysisen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu