Influence of Co-Pyrolysis of Waste Tetra Pak with Waste Motor Oil on Product Distribution and Properties for Fuel Application
Küçük Resim Yok
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Amer Chemical Soc
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this work, waste tetra pak (WTP) and waste motor oil (WMO), with different blend ratios of WTP/WMO (4:1, 2:1, 1:1, 1:2, 1:4) were subjected to co-pyrolysis at 500 degrees C. For the purpose of comparison, individual pyrolysis of WTP and WMO was conducted under identical conditions. Pyrolysis/co-pyrolysis products were collected as liquids (containing an oil phase and an aqueous phase), solid residue, and gaseous products. The highest oil yield was 72.14 wt % and was obtained at a blend ratio of 1:4 (WTP/WMO). Synergistic effects on oil yields were observed in all blends. Heating values of the oils from blends ranged from 45.2 to 46.1 MJ kg(-1). The heating value of the gas product obtained from the co-pyrolysis of WTP with WMO at a blend ratio of 1:1 (WTP/WMO) was 24.5 MJ Nm(-3). Heating values of the solid residue ranged from 24.2 to 26.7 MJ kg(-1), comparable to that of sub-bituminous coal. These results suggest that WTP could be co-pyrolyzed with WMO to produce liquid, solid, and gaseous fuels.
Açıklama
Anahtar Kelimeler
Catalytic Pyrolysis, Thermal-Decomposition, Slow Pyrolysis, Cellulose, Polyethylene, Plastics, Biomass, Wood, Hemicellulose, Valorization
Kaynak
Energy & Fuels
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
33
Sayı
11
