Corrosion and mechanical-micro structural aspects of dissimilar joints of Ti-6Al-4V and Al plates

Basit Öğe Kaydı
dc.authoridFindik, Fehim/0000-0003-2537-1951
dc.authoridKAHRAMAN, NIZAMETTIN/0000-0002-7152-3795
dc.contributor.authorKahraman, Nizamettin
dc.contributor.authorGulenc, Behcet
dc.contributor.authorFindik, Fehim
dc.date.accessioned2024-09-29T15:57:20Z
dc.date.available2024-09-29T15:57:20Z
dc.date.issued2007
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, Ti-6Al-4V and Al plates were joined by explosive welding at various explosive loads. Tensile-shear, bending, hardness, microstructure and corrosion behaviours of the explosively joined samples were investigated. At the end of the tensile-shear tests carried out according to ASTM D 3165-95 standard, no seperation was observed in the interfaces of the joined samples. The results of the bending tests also showed no sign of any distinctive seperation, crack and tear in the interfaces. The highest hardness values were measured in regions next to interfaces. The optical microscope and SEM examinations revealed that an increment in wavelength and amplitude was observed with increasing explosive load. It is seen from the corrosion test results that materials loss was high at the beginning of the corossion tests but the rate of material loss decreased later on. Furthermore, increasing deformation with increasing explosive load increased the materials loss in corrosion tests. (c) 2006 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.ijimpeng.2006.08.003
dc.identifier.endpage1432en_US
dc.identifier.issn0734-743X
dc.identifier.issue8en_US
dc.identifier.scopus2-s2.0-33947589402en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1423en_US
dc.identifier.urihttps://doi.org/10.1016/j.ijimpeng.2006.08.003
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4750
dc.identifier.volume34en_US
dc.identifier.wosWOS:000246195300009en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPergamon-Elsevier Science Ltden_US
dc.relation.ispartofInternational Journal of Impact Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjecttitaniumen_US
dc.subjectaluminiumen_US
dc.subjectexplosive weldingen_US
dc.subjectmicrostructureen_US
dc.subjectcorrosionen_US
dc.titleCorrosion and mechanical-micro structural aspects of dissimilar joints of Ti-6Al-4V and Al platesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu