An experimental investigation of effect of cutting parameters on cutting zone temperature in drilling

Basit Öğe Kaydı
dc.contributor.authorYagmur, S.
dc.contributor.authorAcir, A.
dc.contributor.authorSeker, U.
dc.contributor.authorGünay, M.
dc.date.accessioned2024-09-29T16:22:08Z
dc.date.available2024-09-29T16:22:08Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDrilling is one of the most important machining processes in manufacturing industry. Recently, the work dealing with the problems encountered during drilling and their solution has been increased. Modelling of thermal and mechanical loads developed during drilling has also been increased. In this study, the drillability of AISI 1050 steel widely used in industrial applications will be investigated under various drilling types (hole type) cutting parameters (60, 75, 90 and 108 m/min cutting speed and 0.15, 0.20 and 0.25 mm/rev feed) and cutting tool type (uncoated and TiN/TiAl/TiCN coated solid carbide). Cutting temperatures developed along the drill rake face when drilling with coated and uncoated drill bits will be measured with the help of K type thermocouples inserted in the cooling channels of the drills. When the results of the experiments are evaluated, cutting temperature decreased with increasing feed and coating application significantly reduced cutting temperatures in the cutting zone. Coating application has provided significant benefits in the all parameters.en_US
dc.identifier.endpage6en_US
dc.identifier.issn1300-1884
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84878475614en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9850
dc.identifier.volume28en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCutting Parametersen_US
dc.subjectCutting Zone Temperatureen_US
dc.subjectDrillingen_US
dc.subjectSolid Cementite Carbide Drillen_US
dc.titleAn experimental investigation of effect of cutting parameters on cutting zone temperature in drillingen_US
dc.title.alternativeDeli?k delme i?şlemleri?nde kesme parametreleri? ni?n kesme bölgesi?ndeki? sicakli?a etki?si? ni?n deneysel i?ncelenmesi?en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu