Exchange of experience the effect of synthesis time on the wear behavior of Al-8%Ti alloy produced by mechanical alloying

Basit Öğe Kaydı
dc.authoridTEKELI, SULEYMAN/0000-0001-9826-6875
dc.contributor.authorOzyurek, D.
dc.contributor.authorTekeli, S.
dc.contributor.authorTuncay, T.
dc.contributor.authorYilmaz, R.
dc.date.accessioned2024-09-29T15:51:24Z
dc.date.available2024-09-29T15:51:24Z
dc.date.issued2012
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, Al-8%Ti alloy was produced by mechanical alloying. The produced powders were cold pressed at 630 MPa and synthesized at 600A degrees C for 12 and 24 h under argon gas atmosphere. After synthesis processes, the specimens were examined by SEM, XRD, and hardness tests. Wear tests were carried out under dry sliding conditions using a pin-on-disk type machine at a constant load of 30 N and a sliding speed of 1 m/sec. Total sliding distances were selected as 500, 1000, 1500, and 2000 m. The experimental results showed that the hardness and density of Al-%8Ti alloy increased with increasing synthesis time. It was also observed that volume reduction increased with increasing sliding distance and decreased with increasing synthesis time.en_US
dc.identifier.doi10.1007/s11106-012-9459-5
dc.identifier.endpage495en_US
dc.identifier.issn1068-1302
dc.identifier.issn1573-9066
dc.identifier.issue7-8en_US
dc.identifier.scopus2-s2.0-84874501432en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage491en_US
dc.identifier.urihttps://doi.org/10.1007/s11106-012-9459-5
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4051
dc.identifier.volume51en_US
dc.identifier.wosWOS:000312345700015en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofPowder Metallurgy and Metal Ceramicsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectaluminum alloysen_US
dc.subjectmechanical alloyingen_US
dc.subjectwearen_US
dc.subjectmicrostructureen_US
dc.titleExchange of experience the effect of synthesis time on the wear behavior of Al-8%Ti alloy produced by mechanical alloyingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu