Investigation of the effects of central rectangular gap located in the adhesive layer on failure load and joint stiffness

Basit Öğe Kaydı
dc.authoridoz, ozkan/0000-0002-9833-429X
dc.contributor.authorOz, Ozkan
dc.contributor.authorOzer, Halil
dc.contributor.authorElen, Nurhan Cevik
dc.date.accessioned2024-09-29T15:54:47Z
dc.date.available2024-09-29T15:54:47Z
dc.date.issued2022
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe purpose of this study is experimentally and numerically to reveal the effects of rectangular gap located in the middle of the adhesive layer on the failure load of the single lap joint with various adhesives. The presence of a rectangular gap in the bondline center can be considered both as an adhesive defect and, when gap limits are set correctly, it can also be considered as an adhesive saving. What is intended to be done in this study is to reveal these limits correctly. The effects of the gap length, adhesive type on the von Mises equivalent stress distribution and failure load in the recessed joints were analyzed numerically. For this purpose, four different gap lengths and three different adhesives were considered. The tensile stiffness investigations for the recessed joints were performed. In addition, the effect of the gap length on the failure load of the recessed joints with various adhesives was investigated experimentally. As a result, in the design of recessed joint, although the effect of other parameters considered was also involved, it was seen that especially the adhesive property was clearly the main design parameter.en_US
dc.description.sponsorshipScientific Research Project Unit of Karabuk University [KBUBAP-17-YL-185]en_US
dc.description.sponsorshipThis work was supported by the Scientific Research Project Unit of Karabuk University (KBUBAP-17-YL-185).en_US
dc.identifier.doi10.1007/s40430-022-03470-6
dc.identifier.issn1678-5878
dc.identifier.issn1806-3691
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85127485673en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s40430-022-03470-6
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4283
dc.identifier.volume44en_US
dc.identifier.wosWOS:000777403800002en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofJournal of the Brazilian Society of Mechanical Sciences and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectRecessed jointen_US
dc.subjectvon Mises equivalent stressen_US
dc.subjectFailure loaden_US
dc.subjectStiffnessen_US
dc.titleInvestigation of the effects of central rectangular gap located in the adhesive layer on failure load and joint stiffnessen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu