An Investigation of the Wear Behaviours of Nano Al2O3 Particle Reinforced Cu Composites
dc.contributor.author | Tasdemir, F. | |
dc.contributor.author | Ozyurek, D. | |
dc.contributor.author | Yildirim, M. | |
dc.date.accessioned | 2024-09-29T16:05:14Z | |
dc.date.available | 2024-09-29T16:05:14Z | |
dc.date.issued | 2019 | |
dc.department | Karabük Üniversitesi | en_US |
dc.description | 8th International Advances in Applied Physics and Materials Science Congress and Exhibition (APMAS) -- APR 24-30, 2018 -- Fethiye, TURKEY | en_US |
dc.description.abstract | In this study the effect of nano Al2O3 amount on the wear behaviours of Cu-nano Al2O3 composites, produced by powder metallurgy method, was investigated. In the scope of the study five different amounts of nano Al2O3 (0.5%, 1.0%, 1.5%, 2.0 %, 2.5%) were added into pure Cu powders and mechanically milled for 240 min. The mechanically milled Cu-Al2O3 powders were pre-shaped by cold press under 600 MPa load. Pre-shaped samples were sintered in atmosphere-controlled furnace at 1000 degrees C for 1 h. Microstructure examinations, hardness measurements, and wear tests were carried out. In this study the hardness values were found to have decreased with increasing Al2O3 amount. Wear test results were compatible with hardness results. The highest weight loss was measured with 2.5% Al2O3 content. | en_US |
dc.description.sponsorship | Karabuk University Scientific Research Projects Department [KBU-BAP-15/2-YL-035] | en_US |
dc.description.sponsorship | The authors are pleased to acknowledge the financial support for this study from Karabuk University Scientific Research Projects Department (KBU-BAP-15/2-YL-035). | en_US |
dc.identifier.doi | 10.12693/APhysPolA.135.729 | |
dc.identifier.endpage | 731 | en_US |
dc.identifier.issn | 0587-4246 | |
dc.identifier.issn | 1898-794X | |
dc.identifier.issue | 4 | en_US |
dc.identifier.scopus | 2-s2.0-85071197440 | en_US |
dc.identifier.scopusquality | Q4 | en_US |
dc.identifier.startpage | 729 | en_US |
dc.identifier.uri | https://doi.org/10.12693/APhysPolA.135.729 | |
dc.identifier.uri | https://hdl.handle.net/20.500.14619/6590 | |
dc.identifier.volume | 135 | en_US |
dc.identifier.wos | WOS:000481717100046 | en_US |
dc.identifier.wosquality | Q4 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | Polish Acad Sciences Inst Physics | en_US |
dc.relation.ispartof | Acta Physica Polonica A | en_US |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Metal-Matrix Composites | en_US |
dc.subject | Nanocomposite | en_US |
dc.title | An Investigation of the Wear Behaviours of Nano Al2O3 Particle Reinforced Cu Composites | en_US |
dc.type | Conference Object | en_US |