An investigation on joinability of the AISI 304 and AISI 430 stainless steel by TIG, MIG and shielded metal arc welding methods

Basit Öğe Kaydı
dc.contributor.authorKaya, Y.
dc.date.accessioned2024-09-29T16:22:17Z
dc.date.available2024-09-29T16:22:17Z
dc.date.issued2010
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, AISI 430 ferritic stainless steel and AISI 304 austenitic stainless steel sheets with 3 mm thickness were joined by Tungsten Inert Gas (TIG), Metal Inert Gas (MIG) and shielded metal arc welding methods. Mechanical properties of the welded samples were investigated in terms of tensile strength, notch impact strength, microhardness and microstructure. The results of the tensile test indicated that fracture occurred at theHAZ of the ferritic stainless steel side in the all samples. The highest tensile strength in welded samples were obtained in the samples joined with TIG welding. According to the notch impact test, impact energy of the samples joined with TIG and MIG is higher than that of the samples joined with shielded metal arc welding. Microhardness test showed that the highest hardness was obtained in the HAZ at the AISI 430 stainless steel for all welding condition used in this work. According to microstructure investigation, it was observed that grain growth occurred in the HAZ of the AISI 430 ferritic stainless steel.en_US
dc.identifier.endpage557en_US
dc.identifier.issn1300-1884
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-78149380582en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage549en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9962
dc.identifier.volume25en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAustenitic stainless steelen_US
dc.subjectFerritic stainless steelen_US
dc.subjectMIGen_US
dc.subjectShielded metal arc weldingen_US
dc.subjectTIGen_US
dc.titleAn investigation on joinability of the AISI 304 and AISI 430 stainless steel by TIG, MIG and shielded metal arc welding methodsen_US
dc.title.alternativeAISI 304 ve AISI 430 paslanmaz çeli•kleri•n TIG, MIG ve örtülü elektrod ark kayna?iyla bi•rleşti• ri•lebi•li•rli•?i•ni•n araştirilmasien_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu