Optimization with taguchi method of cutting parameters and tool nose radius in machining of aisi 316l steel
| dc.contributor.author | Günay, M. | |
| dc.date.accessioned | 2024-09-29T16:22:06Z | |
| dc.date.available | 2024-09-29T16:22:06Z | |
| dc.date.issued | 2013 | |
| dc.department | Karabük Üniversitesi | en_US |
| dc.description.abstract | Surface quality and dimensional precision significantly affect to strength and performance of working machine parts that are contacted one another. Additionally, cutting tool geometry and cutting parameters are the most important factor affecting to cutting force, surface roughness and productivity in machining. In this paper, optimization of cutting parameters and tool nose radius (variables) was performed for which Fc and Ra are occurred in machining of AISI 316L austenitic stainless steel. For this purpose, the machinability experiments were carried out using Taguchi's L9 orthogonal array. An analysis of variance (ANOVA) was employed to determine the level of contribution and effects of variables on Fc and R a values measured during the machining experiments. Optimal values of variables which were obtained using the S/N ratios were found at different levels for Fc and Ra. According to the ANOVA results, the most significant variable affecting to cutting force and surface roughness values was determined as feed rate. | en_US |
| dc.identifier.endpage | 444 | en_US |
| dc.identifier.issn | 1300-1884 | |
| dc.identifier.issue | 3 | en_US |
| dc.identifier.scopus | 2-s2.0-84890354327 | en_US |
| dc.identifier.scopusquality | Q2 | en_US |
| dc.identifier.startpage | 437 | en_US |
| dc.identifier.uri | https://hdl.handle.net/20.500.14619/9825 | |
| dc.identifier.volume | 28 | en_US |
| dc.indekslendigikaynak | Scopus | en_US |
| dc.language.iso | tr | en_US |
| dc.relation.ispartof | Journal of the Faculty of Engineering and Architecture of Gazi University | en_US |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | AISI 316L | en_US |
| dc.subject | Cutting force | en_US |
| dc.subject | Surface roughness | en_US |
| dc.subject | Taguchi method | en_US |
| dc.subject | Tool nose radius | en_US |
| dc.title | Optimization with taguchi method of cutting parameters and tool nose radius in machining of aisi 316l steel | en_US |
| dc.title.alternative | Aisi 316L çeli??i?ni?n i?scllenmesi?nde takim radyüsü ve kesme parametreleri?ni?n taguchi? yöntemi?yle opti?mi?zasyonu | en_US |
| dc.type | Article | en_US |
