Finite element modeling of tool stresses on ceramic tools in hard turning

dc.authoridYASAR, NAFIZ/0000-0002-1427-1384
dc.authoridKORKMAZ, Mehmet Erdi/0000-0002-0481-6002
dc.contributor.authorGunay, M.
dc.contributor.authorKorkmaz, M. E.
dc.contributor.authorYasar, N.
dc.date.accessioned2024-09-29T16:09:57Z
dc.date.available2024-09-29T16:09:57Z
dc.date.issued2017
dc.departmentKarabük Üniversitesien_US
dc.description.abstractHard turning process has been developed as a possible alternative instead of more expensive cylindrical grinding operations. This process involves many cutting conditions like traditional turning such as machining parameters, nose radius and tool geometry. This study aims that cutting force components (F-f, F-r, F-c) and cutting tool stresses depending on cutting conditions which are cutting speed, depth of cut and feed rate have been investigated in hard turning of DIN 1.2344 tool steel using uncoated ceramic tools. The experiments of hard turning were performed based on full factorial design. The distributions of cutting tools stresses were analyzed based on finite element method by using ANSYS software. ANOVA results showed that the most important factor on all cutting force components is the depth of cut while cutting speed has insignificant effect. In the results of study, it is shown that cutting tool image taken from ANSYS via finite element analysis and tool microscope are very similar. It is possible to say that the boundary conditions for loading of cutting force components are correct and the prediction of cutting tool stresses by finite element analysis can be determined in hard tuning processes.en_US
dc.identifier.doi10.5755/j01.mech.23.3.14363
dc.identifier.endpage440en_US
dc.identifier.issn1392-1207
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85021648865en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage432en_US
dc.identifier.urihttps://doi.org/10.5755/j01.mech.23.3.14363
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7876
dc.identifier.volume23en_US
dc.identifier.wosWOS:000406156000017en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherKaunas Univ Technolen_US
dc.relation.ispartofMechanikaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFinite element methoden_US
dc.subjectcutting tool stressen_US
dc.subjecthard turningen_US
dc.subjectcutting forceen_US
dc.subjectceramic toolen_US
dc.titleFinite element modeling of tool stresses on ceramic tools in hard turningen_US
dc.typeArticleen_US

Dosyalar